Chevrolet Tracker Bolt Pattern, Wheel & Tire Sizes

Quick answer: This guide covers the Chevrolet Tracker as sold in Brazil and Latin America. The current-generation Tracker (2020-present) and the previous Trax-based Tracker (2013-2019) both use a 5x105 bolt pattern with M12x1.5 studs, while the earlier Suzuki-based Tracker (1999-2012) used a different 5x139.7 pattern - always confirm against your own door placard before buying wheels.

TL;DR

Bolt pattern changed between generations of the Brazilian-market Tracker: 5x105 on the 2013-present cars, but 5x139.7 on the original 1999-2012 Suzuki-based Tracker. Do not assume one figure across the whole model history.

Chevrolet Tracker wheel and tire specifications (Brazil / Latin America)

The name (Tracker) has been used in Brazil for three quite different vehicles over the years, and the wheel bolt pattern is not the same across all of them. This page treats the Brazilian/Latin-American Tracker as the primary subject, since that is the market where this nameplate has stayed continuously in production.

Why the generation matters

The first Brazilian Tracker (1999-2012) was based on the Suzuki Vitara/Grand Vitara platform and used a larger, truck-style bolt pattern. The second generation (2013-2019) was a rebadged Chevrolet Trax and switched to a smaller passenger-car pattern shared with other GM Gamma-platform models. The current, third generation (2020-present, built in Brazil on the GEM platform) kept that same smaller pattern. Because of this history, never assume a single bolt pattern applies to every Tracker - confirm the generation first.

Data table

Generation / yearsBolt patternCentre boreStud threadStock wheel sizesCommon tire sizes
1st gen, Suzuki-based (1999-2012)5x139.7Not independently confirmed - check your wheel or hub markingNot independently confirmed - check a lug bolt or owner's manual16x7 in (steel/alloy, depending on trim)Varies by trim; check your tire sidewall or door placard
2nd gen, Trax-based "New Tracker" (2013-2019)5x105approx. 56.6 mmM12 x 1.516 inVaries by trim; check your tire sidewall or door placard
3rd gen, current Tracker (2020-present)5x105approx. 56.6 mmM12 x 1.516 to 18 in (6.5x16 up to 7x18)205/60R16, 215/60R16, 215/55R17, 215/50R18 (varies by trim)

Where to get the exact figures for your car

Bolt pattern, centre bore and recommended tire size can vary by trim, market and model year even within one generation. The figures above are a solid starting point, but the only fully reliable source for your specific vehicle is:

  • The tire and loading placard on the driver's door jamb
  • The vehicle owner's manual
  • The markings stamped on your current wheels and tire sidewalls
  • Your Chevrolet dealer's parts department, using your VIN

Lug torque note

We did not find a manufacturer-published wheel lug torque figure we could verify for this model, so no number is stated here. Use the torque printed in your owner's manual, or have a shop torque the wheels to the factory specification for your exact trim.

Summary

Primary market coveredBrazil / Latin America
1st gen (1999-2012) bolt pattern5x139.7
2nd gen (2013-2019) bolt pattern5x105
3rd gen (2020-present) bolt pattern5x105
Stud thread (2013-present)M12 x 1.5
Centre bore (2013-present)approx. 56.6 mm
Current stock wheel range16 to 18 in

Full diagnostics

For the complete step-by-step diagnostic and repair guide, see Chevrolet Tracker: Common Problems, Fault Codes & Repairs.

Frequently asked questions

Is the bolt pattern the same on every Chevrolet Tracker?

No. The original 1999-2012 Brazilian Tracker, based on the Suzuki Vitara/Grand Vitara, used a 5x139.7 bolt pattern. Both the 2013-2019 Trax-based Tracker and the current 2020-present Tracker use a smaller 5x105 pattern. Always check which generation you have before ordering wheels.

What bolt pattern does the current Chevrolet Tracker use?

The Tracker built in Brazil since 2020 uses a 5x105 bolt pattern with M12 x 1.5 stud threads, the same pattern used by the previous Trax-based Tracker (2013-2019). This is shared with a number of other Chevrolet, Opel/Vauxhall and Buick models.

What tire sizes come on the current Tracker?

Factory tire sizes on the 2020-present Tracker range from 205/60R16 on base trims up to 215/50R18 on higher trims, with 215/60R16 and 215/55R17 as intermediate options depending on the specific trim and wheel size fitted.

Where can I confirm the exact specs for my own Tracker?

Check the tire and loading information placard on the driver's door jamb, your owner's manual, or the size markings stamped on your current wheels and tires. These are the only sources that reflect your specific trim and model year exactly.

Where the binding figure is on your car

The figures on this page are per-generation references compiled from manufacturer documentation and established fitment databases. Where your own vehicle disagrees with them, your vehicle is right.