Ford Escape Bolt Pattern, Wheel & Tire Sizes
TL;DR
Pre-2013 Escapes are 5x114.3mm; 2013-and-newer Escapes are 5x108mm - these two patterns are not interchangeable, so know your generation before buying wheels.
Ford Escape wheel bolt pattern by generation
The Ford Escape bolt pattern is not the same across its whole production run. Ford switched platforms for the third generation in 2013, and the wheel bolt pattern (PCD) changed along with it. Multiple independent parts catalogs and fitment databases agree on the two patterns below, but always cross-check your own vehicle before buying wheels.
First and second generation (2001-2012)
These Escapes, including the 2005 and 2008 facelifts, use a 5x114.3mm (5x4.5 inch) bolt pattern with a 67.1mm center bore and M12 x 1.5 lug studs. This is a widely shared Ford/Mazda pattern from that era.
Third and fourth generation (2013-present)
Starting with the 2013 model year through the current 2020+ generation, the Escape uses a 5x108mm (5x4.25 inch) bolt pattern with a 63.4mm center bore and M12 x 1.5 lug studs. This pattern is shared with the Ford Focus and Bronco Sport of the same era.
Lug torque
We could not verify a single official lug nut torque figure that applies across all Escape years and trims from a manufacturer source, so no number is stated here - check your owner's manual for the correct torque for your specific model year.
Data table
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| 1st gen (2001-2004) | 5x114.3mm | 67.1mm | M12 x 1.5 | 15-16 in | 225/70R15, 215/70R16 |
| 1st gen facelift (2005-2007) | 5x114.3mm | 67.1mm | M12 x 1.5 | 16-17 in | 235/70R16, 235/60R17 |
| 2nd gen (2008-2012) | 5x114.3mm | 67.1mm | M12 x 1.5 | 16-17 in | 235/70R16, 235/60R17 |
| 3rd gen (2013-2019) | 5x108mm | 63.4mm | M12 x 1.5 | 17-18 in | 235/55R17, 235/50R18 |
| 4th gen (2020-present) | 5x108mm | 63.4mm | M12 x 1.5 | 17-18 in | 225/65R17, 225/60R18 |
Where to confirm your own vehicle
- Driver's door jamb placard - shows the factory tire size, wheel size, and cold inflation pressures for your exact build.
- Owner's manual - lists approved wheel and tire size options and lug nut torque.
- Markings stamped on your current wheel and tire sidewall.
- A dealer parts department or a wheel-fitment database, entering your exact VIN or model year.
Summary
| Bolt pattern (2001-2012) | 5x114.3mm |
|---|---|
| Bolt pattern (2013-present) | 5x108mm |
| Center bore (2001-2012) | 67.1mm |
| Center bore (2013-present) | 63.4mm |
| Stud thread | M12 x 1.5 |
| Stock wheel range | 15 to 18 inches |
| Common tire sizes | 225/70R15 to 235/50R18 (varies by year) |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Ford Escape: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Are Ford Escape wheels the same across all generations?
No. The 2001-2012 first and second generation Escape uses a 5x114.3mm bolt pattern, while the 2013-present third and fourth generation uses 5x108mm. These two patterns are physically different and wheels are not interchangeable between them without an adapter.
What is the center bore on a Ford Escape?
Pre-2013 Escapes (2001-2012) have a 67.1mm center bore. 2013-and-newer Escapes have a 63.4mm center bore. Both use M12 x 1.5 wheel studs. Confirm on hub-centric aftermarket wheels since the wrong bore can cause vibration even with the correct bolt pattern.
Can I put 2015 Ford Escape wheels on a 2010 Ford Escape?
No, not directly. The 2015 (third generation, 5x108mm) and 2010 (second generation, 5x114.3mm) use different bolt patterns and center bores, so wheels do not bolt straight across without a bolt-pattern adapter, which is not generally recommended for daily use.
What tire size comes stock on a Ford Escape?
It depends heavily on model year and trim: early models (2001-2007) ran 15-16 inch tires such as 225/70R15, while current models (2020+) commonly run 225/65R17 or 225/60R18. Check your driver's door placard for the exact factory size on your vehicle.