Ford F-150 Oil Capacity & Oil Type
TL;DR
Capacity ranges from 6.0 to about 8.8 US qt depending on which of the six-plus engine options your F-150 has, so match your VIN-specific engine code before buying oil.
Why the F-150 has no single oil capacity
The F-150 has been sold with more engine choices than almost any other pickup - naturally aspirated V6 and V8s, three generations of EcoBoost turbo V6s, a V6 diesel, and a hybrid. Each engine code has its own sump size and its own approved viscosity, so a number that is correct for a 2019 truck can be wrong for a 2022 truck even if both say (F-150) on the door.
Find your engine code first
Before using any figure below, confirm which engine is actually under the hood. The engine code and displacement are printed on the vehicle emission control information (VECI) label under the hood, and the exact quart figure and oil spec for your specific build year are printed on the oil fill cap and in the owner's manual maintenance chart.
Capacity and viscosity by engine
| Engine code / years | Capacity with filter (L / US qt) | Viscosity |
|---|---|---|
| 3.7L V6 Cyclone (2011-2014) | 5.7 L / 6.0 qt | SAE 5W-20 |
| 5.0L V8 Coyote, gen 1-2 (2011-2017) | 7.3 L / 7.7 qt | SAE 5W-20 |
| 5.0L V8 Coyote, gen 3 (2018-2020) | 7.3-8.3 L / 7.7-8.8 qt (sources vary - verify on dipstick) | SAE 5W-20 |
| 5.0L V8 Coyote, gen 4 (2021-present) | 7.3 L / 7.7 qt | SAE 5W-30 |
| 2.7L EcoBoost V6 (2015-present, all gens) | 5.7 L / 6.0 qt | SAE 5W-30 |
| 3.5L EcoBoost V6 (2011-present, all gens) | 5.7 L / 6.0 qt | SAE 5W-30 |
| 3.3L V6 Cyclone base (2018-present) | 5.7-6.0 L / 6.0-6.3 qt (sources vary) | SAE 5W-20 |
| 3.0L Power Stroke diesel (2018-2020) | 6.1 L / 6.4 qt | SAE 5W-30 |
| 3.0L Power Stroke diesel (2021-present) | 6.2 L / 6.6 qt | SAE 5W-30 (5W-40 approved) |
| 3.5L PowerBoost hybrid V6 (2021-present) | 5.7 L / 6.0 qt | SAE 5W-30 |
Where a range is shown
A couple of rows above show a range instead of one number because credible service references disagree slightly on that engine's exact sump size (for example the 2018-2020 5.0L Coyote). When that happens, treat the printed oil fill cap and the dipstick as the tie-breaker for your individual truck.
The definitive source for your truck
- The oil filler cap on top of the engine, often stamped with the viscosity grade
- The owner's manual maintenance specifications chart (matched to your exact engine option)
- The driver's door jamb placard, which lists tire and sometimes fluid data
- Ford's towing guide and body builder documents, useful for confirming which engine is installed on commercial or fleet trucks
Summary
| 3.7L V6 (2011-2014) | 6.0 qt / 5.7 L, 5W-20 |
|---|---|
| 5.0L Coyote V8 (2011-2017, 2021+) | 7.7 qt / 7.3 L |
| 5.0L Coyote V8 (2018-2020) | 7.7-8.8 qt / 7.3-8.3 L (verify) |
| 2.7L EcoBoost V6 | 6.0 qt / 5.7 L, 5W-30 |
| 3.5L EcoBoost V6 | 6.0 qt / 5.7 L, 5W-30 |
| 3.3L V6 base (2018+) | 6.0-6.3 qt / 5.7-6.0 L, 5W-20 |
| 3.0L Power Stroke diesel | 6.4-6.6 qt / 6.1-6.2 L, 5W-30 |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Ford F-150: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Does the 5.0L Coyote V8 always take the same amount of oil?
No. The 2011-2017 and 2021-present Coyote generations take about 7.7 US qt (7.3 L), but some service references list the 2018-2020 version at up to 8.8 US qt (8.3 L). Because sources disagree on that one generation, check your dipstick and owner's manual rather than assuming.
What viscosity does my F-150 EcoBoost need?
Both the 2.7L and 3.5L EcoBoost V6 engines call for SAE 5W-30 across all model years, unlike the naturally aspirated 3.3L and 3.7L V6 engines which use 5W-20. Using 5W-20 in an EcoBoost is not the approved spec for turbocharged operating temperatures.
How do I identify which engine my F-150 has?
Check the VECI (Vehicle Emission Control Information) sticker under the hood, which lists the engine displacement and code, or look up your VIN's 8th digit against Ford's engine code chart. Do not guess from the model year alone since multiple engines were offered in the same years.
Is the 3.0L Power Stroke diesel oil capacity the same every year?
No. The 2018-2020 3.0L Power Stroke takes about 6.4 US qt (6.1 L), while the updated 2021-and-later version takes about 6.6 US qt (6.2 L), both in SAE 5W-30. Confirm the build year on your emissions label before topping off.