Honda Accord Bolt Pattern, Wheel & Tire Sizes
TL;DR
All modern Honda Accord sedans (9th, 10th and 11th gen, 2013-present) share a 5x114.3mm bolt pattern, 64.1mm centre bore and M12x1.5 studs, but wheel diameter, offset and tire size vary by trim and year.
Honda Accord wheel and tire specifications by generation
The Honda Accord sedan has used the same 5x114.3mm bolt pattern and 64.1mm centre bore since at least the 9th generation (2013-2017) through the current 11th generation (2023-present). This consistency makes wheels reasonably interchangeable across recent generations, but tire sizes, wheel widths and offsets still differ by trim and model year, so treat the table below as a starting reference rather than a substitute for checking your own vehicle.
Bolt pattern and centre bore
Independent fitment databases (wheel-size.com and multiple wheel-fitment retailers) agree that 9th, 10th and 11th generation Accords use a 5x114.3mm (5 lug, 114.3mm pitch circle diameter) bolt pattern with a 64.1mm centre bore and M12x1.5 thread wheel studs (19mm hex lug nuts). Earlier generations (8th gen and older) are not covered here because we could not verify their specs against a credible source for this page.
Wheel and tire sizes
Factory wheel diameters range from 16 to 19 inches depending on trim, with tire sizes generally between 215/60R16 and 235/40R19. Higher trims (Sport, Touring) get larger, lower-profile wheel and tire combinations; base and mid trims run smaller, taller-sidewall tires.
Lug nut torque
Sources vary on the exact factory torque figure for Accord lug nuts, with figures most commonly cited in the 80 to 83 ft-lb (roughly 108 to 113 Nm) range depending on model year. Because this can differ by year and we could not confirm one single authoritative number for every generation, always torque to the exact value printed in your owner's manual, tightened in a star pattern.
Where to verify your exact specs
Bolt pattern and centre bore rarely change, but tire size, wheel offset and load rating are trim-specific and can vary even within one model year. Always confirm your car's exact specification using one of these authoritative sources on the vehicle itself:
- The tire and loading information placard on the driver's door jamb
- The owner's manual (also often summarized on the fuel-filler door or glovebox)
- The size markings moulded into the sidewall of your current tires
- Honda's official wheel and tire fitment guide or a dealer parts department for your exact VIN
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| 9th gen (2013-2017) | 5x114.3 | 64.1mm | M12x1.5 | 16-18 in (7.0J-7.5J) | 215/60R16, 225/50R17, 235/45R18 |
| 10th gen (2018-2022) | 5x114.3 | 64.1mm | M12x1.5 | 17-19 in (7.5J-8.5J) | 225/50R17, 235/45R18, 235/40R19 |
| 11th gen (2023-present) | 5x114.3 | 64.1mm | M12x1.5 | 17-19 in (7.5J-8.5J) | 225/50R17, 235/45R18, 235/40R19 |
Summary
| Bolt pattern (9th-11th gen) | 5x114.3mm |
|---|---|
| Centre bore (9th-11th gen) | 64.1mm |
| Stud thread | M12x1.5 |
| Lug nut hex size | 19mm |
| Typical lug torque | 80-83 ft-lb (sources vary; confirm in manual) |
| Stock wheel diameter range | 16-19 inches |
| Common tire sizes | 215/60R16 to 235/40R19 |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Honda Accord: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the Honda Accord bolt pattern the same on every generation?
For the 9th generation (2013-2017), 10th generation (2018-2022) and 11th generation (2023-present) sedans, yes - all use 5x114.3mm. We did not verify bolt patterns for 8th generation or older Accords, so do not assume they match; check the door placard or a fitment database for those older cars.
What centre bore do Honda Accord wheels use?
The 9th through 11th generation Accord sedans use a 64.1mm centre bore, confirmed via wheel-fitment databases. Most aftermarket wheels are made with a larger bore and a hub-centric ring to adapt down to 64.1mm, so check the ring is included if you buy aftermarket wheels.
What size are Honda Accord wheel studs and lug nuts?
Accord sedans from the 9th through 11th generation use M12x1.5 thread studs with 19mm hex lug nuts. Factory torque figures cited by different sources range from about 80 to 83 ft-lb, so confirm the exact figure in your owner's manual rather than relying on a single number.
What tire size came stock on my Honda Accord?
It depends on trim and year: base trims typically run 16 or 17-inch wheels with taller-sidewall tires like 215/60R16 or 225/50R17, while Sport and Touring trims run 18 or 19-inch wheels with lower-profile tires like 235/45R18 or 235/40R19. Your exact original tire size is printed on the driver's door placard.