Honda CR-V Oil Capacity & Oil Type
TL;DR
Capacity ranges from about 3.7 qt (1.5L turbo models) to 4.6 qt (2.4L models), always 0W-20 on newer engines - check your engine code and door placard first.
Honda CR-V oil capacity by engine
The CR-V has been built with several different engines across its generations, and oil capacity changes with each one. Do not use a single number for the whole model line - match the figures below to the engine code stamped on a sticker under the hood or listed in your owner's manual.
2.4L four-cylinder generations (K-series)
The third and fourth generation CR-V (roughly 2007-2014) used the K24Z family. Early K24Z1 (2007-2009) and K24Z6 (2010-2011) engines hold about 4.4 US qt with a filter change, while the later K24Z7 (2012-2014) was revised down to 4.2 US qt. The fifth-generation LX trim briefly kept a 2.4L K24W9 engine in 2017 that takes 4.6 US qt.
1.5L turbo (fifth and sixth generation)
From 2017 through 2022, most CR-V trims switched to the 1.5L turbocharged L15B7/L15BE engine, which takes 3.7 US qt (3.5 L) with a filter change and specifies 0W-20 synthetic oil.
2.0L four-cylinder and hybrid (sixth generation, 2023+)
The 2023+ CR-V offers a naturally aspirated 2.0L LFC3 (used in the hybrid powertrain) that takes about 4.2 US qt (4.0 L) with filter, and continues to offer the 1.5L turbo at 3.7 US qt. Both use 0W-20.
Where to double-check for your exact car
- The engine oil viscosity is printed on the oil filler cap under the hood.
- Your owner's manual lists the exact capacity for your specific engine and trim.
- The driver's door jamb placard lists tire and sometimes fluid specifications.
- A dealer or independent shop can look up the exact figure from your VIN.
| Engine code / years | Capacity with filter (L / US qt) | Viscosity |
|---|---|---|
| K24Z1 (2007-2009, 2.4L) | 4.2 L / 4.4 qt | 0W-20 or 5W-20 |
| K24Z6 (2010-2011, 2.4L) | 4.2 L / 4.4 qt | 0W-20 |
| K24Z7 (2012-2014, 2.4L) | 4.0 L / 4.2 qt | 0W-20 |
| K24W9 (2017, 2.4L, LX trim) | 4.3 L / 4.6 qt | 0W-20 |
| L15B7 / L15BE (2017-2022, 1.5L turbo) | 3.5 L / 3.7 qt | 0W-20 |
| LFC3 (2023+, 2.0L, incl. hybrid) | 4.0 L / 4.2 qt | 0W-20 |
| L15BE (2023+, 1.5L turbo) | 3.5 L / 3.7 qt | 0W-20 |
Summary
| 1.5L turbo (2017-2022, L15B7/L15BE) | 3.7 US qt (3.5 L), 0W-20 |
|---|---|
| 1.5L turbo (2023+, L15BE) | 3.7 US qt (3.5 L), 0W-20 |
| 2.4L K24Z7 (2012-2014) | 4.2 US qt (4.0 L), 0W-20 |
| 2.4L K24Z1/Z6 (2007-2011) | 4.4 US qt (4.2 L), 0W-20 or 5W-20 |
| 2.4L K24W9 (2017 LX) | 4.6 US qt (4.3 L), 0W-20 |
| 2.0L LFC3 (2023+, incl. hybrid) | 4.2 US qt (4.0 L), 0W-20 |
| Always confirm on | Oil filler cap, owner's manual, door placard |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Honda CR-V: Common Problems, Fault Codes & Repairs.
Frequently asked questions
How do I find out which engine my CR-V has?
Open the hood and look for a sticker on the engine or under-hood emissions label that lists a code such as L15B7, K24Z7, or LFC3. Your owner's manual and any dealer parts lookup by VIN will also confirm it.
Can I use 5W-20 instead of 0W-20 in my CR-V?
For 2010 and newer CR-V engines, Honda specifies 0W-20 for best fuel economy and cold-start protection; some earlier 2007-2009 K24Z1 engines were originally spec'd for 5W-20. Using 5W-20 as a substitute will not damage the engine but is not the factory recommendation - check your owner's manual for your exact model year.
Why do oil capacity figures vary between websites for my CR-V?
Because the same model name covers several different engines over the years (2.4L K24Z variants, 1.5L turbo, 2.0L/hybrid), and capacity differs between them by up to half a quart. Match the figure to your specific engine code, not just the model year alone.
Is the oil capacity different for the CR-V Hybrid?
The hybrid's 2.0L LFC3 engine itself takes about 4.2 US qt (4.0 L) with filter and 0W-20, similar to the non-hybrid 2.0L, but always confirm with your owner's manual since hybrid service procedures can differ.