Honda Pilot Bolt Pattern, Wheel & Tire Sizes
TL;DR
3rd and 4th generation Pilots (2016-present) verified at 5x120 mm / 64.1 mm bore / M14x1.5. For 2003-2015 models, always confirm your bolt pattern in person rather than trusting an unverified number.
What we could verify
Wheel-fitment data for the Honda Pilot changes by generation, and Honda switched bolt patterns at least once during the model's history. For the 3rd generation (2016-2022) and the 4th generation (2023-present), fitment databases consistently list a 5x120 mm bolt pattern, a 64.1 mm center bore, M14x1.5 wheel studs, and a factory tightening torque of 127 Nm (94 lb-ft). These figures were cross-checked across multiple model years within each generation and agreed.
What we could not verify
For the 1st generation (2003-2008) and 2nd generation (2009-2015) Pilot, we were unable to pull a bolt pattern or center bore figure from a source we consider reliable enough for this rewrite. Rather than repeat a commonly circulated but unconfirmed number, we are leaving those cells blank below. If your Pilot is a 2003-2015 model, read the pattern directly off your current wheels (count the studs and measure) or ask a tire shop to confirm with a fitment gauge before ordering aftermarket wheels.
Stock wheel and tire sizes
Factory wheel and tire sizes for the 2016-2022 Pilot include 18-inch wheels (245/60R18) and 20-inch wheels (245/50R20). The 2023+ Pilot factory sizes include 18-inch wheels (255/60R18 or 265/60R18 depending on trim) and 20-inch wheels (255/50R20).
Where to find your exact specs
- Driver's door jamb placard - lists the recommended tire size and sometimes rim size for your exact trim
- Owner's manual - has the full wheel and tire specification section for your build date
- Markings stamped on your current wheel's back side (rim width, offset)
- A tire/wheel shop can measure your bolt pattern and center bore directly with a gauge in under a minute
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| 1st gen (2003-2008) | Not independently confirmed for this rewrite | Not confirmed | Not confirmed | 16-17 in (varies by trim) | Check door placard |
| 2nd gen (2009-2015) | Not independently confirmed for this rewrite | Not confirmed | Not confirmed | 17-18 in (varies by trim) | Check door placard |
| 3rd gen (2016-2022) | 5x120 mm | 64.1 mm | M14x1.5 | 18 in, 20 in | 245/60R18, 245/50R20 |
| 4th gen (2023-present) | 5x120 mm | 64.1 mm | M14x1.5 | 18 in, 20 in | 255/60R18, 265/60R18, 255/50R20 |
Summary
| 3rd/4th gen bolt pattern | 5x120 mm (verified) |
|---|---|
| 3rd/4th gen center bore | 64.1 mm (verified) |
| 3rd/4th gen stud thread | M14x1.5 |
| 3rd/4th gen lug torque | 127 Nm / 94 lb-ft |
| 1st/2nd gen bolt pattern | Not confirmed - check your vehicle |
| 2016-2022 stock sizes | 18 in / 20 in, 245/60R18 or 245/50R20 |
| 2023+ stock sizes | 18 in / 20 in, 255-265/60R18 or 255/50R20 |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Honda Pilot: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the Honda Pilot bolt pattern the same across all generations?
No, do not assume this. We confirmed 5x120 mm with a 64.1 mm center bore for the 3rd generation (2016-2022) and 4th generation (2023-present). For the 2003-2015 (1st and 2nd generation) Pilot we could not confirm an exact figure from a reliable source, so check your door placard, owner's manual, or have a shop measure it before buying wheels.
What lug nut thread and torque does the Honda Pilot use?
For the 3rd and 4th generation Pilot (2016-present), the wheel studs are M14x1.5 and the factory tightening torque is 127 Nm (94 lb-ft). We did not find a confirmed torque figure for the 2003-2015 models in this rewrite, so use your owner's manual figure for those years.
What size wheels and tires come stock on the Honda Pilot?
The 2016-2022 Pilot shipped on 18-inch wheels with 245/60R18 tires or 20-inch wheels with 245/50R20 tires depending on trim. The 2023+ Pilot uses 18-inch wheels (255/60R18 or 265/60R18) or 20-inch wheels (255/50R20) depending on trim.
Where can I find the exact wheel specs for my specific Pilot?
The most reliable source is always your own vehicle: check the driver's door jamb placard, the owner's manual's wheel and tire section, the markings on the back of your current wheel, or ask a tire shop to measure your bolt pattern and center bore with a fitment gauge.