Hyundai Elantra Bolt Pattern, Wheel & Tire Sizes
TL;DR
5x114.3 mm bolt pattern for 2007-2023+ Elantras, 4x114.3 mm for 1992-2006 models; M12x1.5 studs throughout; wheel sizes span 14 to 19 inches depending on trim and year.
Hyundai Elantra bolt pattern and wheel specs
The Hyundai Elantra has gone through several generations, and the bolt pattern changed once along the way. Early Elantras (roughly 1992-2006, covering the J1/J2, J3/RD and XD generations) used a 4x114.3 mm (4 lug) pattern. Starting with the 2007 HD generation and continuing through the current CN7 generation, Hyundai switched to a 5x114.3 mm (5 lug) pattern with M12x1.5 thread studs.
Center bore - verify before you buy
Multiple wheel-fitment references list the Elantra center bore as approximately 67.1 mm for the 5-lug generations. This figure appears in fewer independent sources than the bolt pattern itself, so treat it as a helpful starting point rather than a guarantee - always measure your factory wheel or hub, or ask your wheel supplier to confirm hub-centric fit for your exact year and trim.
Stock wheel and tire sizes by generation
Factory wheel diameters grew over time, from 13-14 inch steel wheels on early base models to 18-19 inch alloys on later Sport, N Line and N performance trims. Tire sizes follow the same trend, from narrow 175/70R13 economy tires to wider 235/35R19 performance rubber on the Elantra N.
| Generation / years | Bolt pattern | Center bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| J1/J2/J3/RD/XD (1992-2006) | 4x114.3 mm | ~67.1 mm (verify) | M12x1.5 | 13-14 in steel/alloy | 175/70R13 - 195/60R14 |
| HD (2007-2010) | 5x114.3 mm | ~67.1 mm (verify) | M12x1.5 | 15-16 in | 195/65R15, 205/55R16 |
| MD/UD (2011-2016) | 5x114.3 mm | ~67.1 mm (verify) | M12x1.5 | 15-17 in | 195/65R15 - 215/45R17 |
| AD (2017-2020) | 5x114.3 mm | ~67.1 mm (verify) | M12x1.5 | 15-18 in | 195/65R15 - 225/40R18 |
| CN7 (2021-2023+, incl. N Line/N) | 5x114.3 mm | ~67.1 mm (verify) | M12x1.5 | 15-19 in | 195/65R15 - 235/35R19 |
Where to find the exact numbers for your car
Bolt pattern can be trusted from this table by generation, but exact tire size, recommended wheel width/offset and lug torque are trim-specific and best read directly from your own vehicle. Check these sources on your car:
- The tire and loading placard on the driver's door jamb (tire size and pressure)
- The owner's manual (lug torque specification and recommended wheel sizes)
- The sidewall markings on your current tires (exact size in service)
- Your dealer's parts department or a wheel shop, for center bore and hub-centric ring confirmation
Summary
| Bolt pattern (2007-present) | 5x114.3 mm |
|---|---|
| Bolt pattern (1992-2006) | 4x114.3 mm |
| Center bore (commonly cited) | ~67.1 mm - verify |
| Stud thread | M12x1.5 |
| Stock wheel size range | 13-19 inches |
| Common tire sizes | 175/70R13 to 235/35R19 |
| Authoritative source | Driver's door placard, owner's manual, tire sidewall |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Hyundai Elantra: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Did the Hyundai Elantra bolt pattern ever change?
Yes. Elantras from roughly 1992-2006 use a 4x114.3 mm, 4-lug pattern. Starting with the 2007 HD generation and continuing through the current CN7 generation, Hyundai moved to a 5x114.3 mm, 5-lug pattern. Always confirm the lug count and pattern on your specific car before ordering wheels.
What is the Hyundai Elantra center bore?
Wheel-fitment references commonly list about 67.1 mm for the 5-lug Elantra generations (2007 onward). This number is less consistently documented than the bolt pattern, so measure your factory wheel or ask a wheel shop to confirm before fitting aftermarket wheels, especially if you plan to use hub-centric rings.
Can I fit 18 or 19 inch wheels on an older Elantra?
Larger wheels can often be fitted with the correct offset and tire profile, but factory-recommended sizes vary by generation and trim (see the table above). Check your owner's manual and consult a wheel fitment shop to confirm clearance, speedometer accuracy and load rating for your exact car.
What lug nut thread size does the Elantra use?
Hyundai Elantra generations from the 1990s through the current CN7 consistently use M12x1.5 lug studs according to wheel-fitment references. Confirm the exact torque specification for your model year in your owner's manual before installing wheels.