Hyundai Santa Fe Bolt Pattern, Wheel & Tire Sizes
TL;DR
Bolt pattern has stayed 5x114.3 (67.1 mm bore, M12x1.5 studs) across all five generations, but wheel size and tire size vary a lot by trim - always confirm against your own door placard.
Hyundai Santa Fe wheel and bolt pattern specs by generation
The Santa Fe has been built in five generations since 2000: SM (2001-2006), CM (2007-2012), DM/NC (2013-2018), TM (2019-2023) and the current MX5 (2024-present). Multiple independent wheel-fitment databases (wheel-size.com, boltpatternhq.com, whattirefits.com) and lug-hardware suppliers (BONOSS, car-bolts.com) agree that the 5x114.3 mm bolt pattern, 67.1 mm centre bore, and M12x1.5 stud thread have been carried through every generation. What does change from generation to generation is factory wheel diameter and tire size, since those move with trim level, engine, and model-year refresh.
What changes by trim
Base and mid trims typically ride on 17-18 inch wheels with a taller sidewall, while range-topping trims (Limited, Calligraphy, XRT) are fitted with 20-21 inch wheels and a lower-profile tire. Because Hyundai revises trim-level wheel/tire packages almost every model year, treat the tire sizes below as commonly seen examples rather than a guarantee for your exact build.
Data table
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| SM (2001-2006) | 5x114.3 | 67.1 mm | M12x1.5 | 15-16 in | 215/70R15, 225/70R16, 235/60R16 |
| CM (2007-2012) | 5x114.3 | 67.1 mm | M12x1.5 | 16-18 in | 225/70R16, 235/65R17, 235/60R18 |
| DM / NC (2013-2018) | 5x114.3 | 67.1 mm | M12x1.5 | 17-19 in | 235/65R17, 235/60R18, 235/55R19 |
| TM (2019-2023) | 5x114.3 | 67.1 mm | M12x1.5 | 17-20 in | 235/65R17, 235/60R18, 255/50R19, 255/45R20 |
| MX5 (2024-present) | 5x114.3 | 67.1 mm | M12x1.5 | 18-21 in | 235/60R18, 245/60R18, 255/45R20, 245/45R21 |
Always verify on your own vehicle
Bolt pattern and centre bore rarely differ within one generation, but wheel and tire size can differ between trims built in the same year. Before buying wheels, tires, or spacers, confirm the exact figures for your specific car using one of these authoritative sources:
- The tire and loading placard on the driver-side door jamb
- The owner's manual (and the vehicle certification label, often on the door or under the hood)
- The size markings molded into the sidewall of your current tires
- Hyundai's official wheel/tire fitment guide or a dealer parts department, especially for towing-rated setups
Summary
| Bolt pattern (all generations) | 5x114.3 mm |
|---|---|
| Centre bore (all generations) | 67.1 mm |
| Stud thread (all generations) | M12x1.5 |
| SM (2001-2006) wheels | 15-16 in |
| TM (2019-2023) wheels | 17-20 in |
| MX5 (2024-present) wheels | 18-21 in |
| Verify on your car | Driver door placard / owner's manual |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Hyundai Santa Fe: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the Hyundai Santa Fe bolt pattern the same on every generation?
Yes, based on the sources checked (wheel-size.com, boltpatternhq.com, BONOSS lug-hardware data), all five generations - SM, CM, DM/NC, TM, and MX5 - use a 5x114.3 mm (5x4.5 in) bolt pattern with a 67.1 mm centre bore. Always double-check against your door placard before buying wheels, since aftermarket listings occasionally mix up model years.
What size lug nuts does a Santa Fe use?
Wheel studs are M12x1.5 across the SM, CM, DM/NC, TM, and MX5 generations according to lug-hardware suppliers. If you are fitting aftermarket wheels, also check the seat type (conical/tapered vs. ball) that your specific wheel requires, since that is not standardized and the wrong seat type will not seat correctly even with the right thread.
Can I put 20 inch or 21 inch wheels on an older Santa Fe?
Physically, yes, since the 5x114.3 bolt pattern and 67.1 mm bore are shared across generations, but you need to match the overall tire diameter to your car's factory size to avoid speedometer error, ABS/stability-control miscalibration, and body/suspension clearance issues. Consult a wheel-fitment calculator or a tire shop for a plus-size fitment specific to your generation and trim.
Where is the most reliable place to check my own Santa Fe's exact wheel specs?
The tire and loading information placard on the driver's door jamb is the single best source, since it lists the exact factory tire size, wheel size, and recommended pressures for your specific build. Cross-check it against the owner's manual and the size embossed on your current tires' sidewalls before ordering new wheels or tires.