Hyundai Sonata Bolt Pattern, Wheel & Tire Sizes
TL;DR
5x114.3 mm / 67.1 mm centre bore / M12x1.5 studs covers the 2006-2024+ Sonata (NF, YF, LF, DN8); the 1998-2005 EF generation is a different 4x114.3 mm pattern. Confirm on your door placard before buying wheels.
Bolt pattern by generation
Hyundai changed the Sonata's bolt pattern once in recent history. The EF generation (1998-2005) used a 4x114.3 mm 4-lug pattern. Starting with the NF generation (2006-2010) and continuing through the YF (2011-2014), LF (2015-2019) and DN8 (2020-present) generations, Hyundai moved to a 5x114.3 mm 5-lug pattern with a 67.1 mm centre bore, which multiple fitment sources agree on for all four of those generations.
Stud thread and torque
On the 5-lug cars (NF onward) the studs are M12x1.5. Reported lug nut torque figures vary a bit by source and trim - roughly 74-108 Nm (55-80 ft-lb) depending on the year - so use the torque printed in your own owner's manual rather than a single number for every model year.
Wheel and tire sizes
Factory wheel and tire sizes vary a lot by trim and model year, especially on the DN8, which spans everything from 16-inch base wheels to 20-inch performance wheels. The table below lists the ranges that fitment databases report for each generation; your exact trim's size is on the tire sidewall and the door placard.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| EF (1998-2005) | 4x114.3 mm | Not reliably confirmed - check your wheel/placard | Not reliably confirmed | 14-17 in (varies by trim) | 185/70R14 to 225/50R17 |
| NF (2006-2010) | 5x114.3 mm | 67.1 mm | M12x1.5 | 16-17 in, 6.5J-7.5J | 215/60R16 to 225/55R17 |
| YF (2011-2014) | 5x114.3 mm | 67.1 mm | M12x1.5 | 16-18 in | 205/65R15 to 235/45R18 |
| LF (2015-2019) | 5x114.3 mm | 67.1 mm | M12x1.5 | 16-19 in | 205/65R16 to 245/40R19 |
| DN8 (2020-present) | 5x114.3 mm | 67.1 mm | M12x1.5 | 16-20 in (Limited: 18x7.5) | 205/65R16 to 245/35R20 |
Where to find the definitive figure for your car
Fitment databases can be wrong for a specific trim or region-market build. Before buying wheels, tires, or spacers, verify on your own vehicle:
- The driver's door jamb placard - lists the factory tire size, load rating, and cold inflation pressure.
- The owner's manual - lists lug nut torque and spare wheel specs.
- The markings stamped into the back of your current wheel - bolt pattern and offset are usually cast into the wheel itself.
Summary
| Bolt pattern (2006-present) | 5x114.3 mm |
|---|---|
| Bolt pattern (1998-2005 EF) | 4x114.3 mm |
| Centre bore (2006-present) | 67.1 mm |
| Stud thread (2006-present) | M12x1.5 |
| Lug torque (varies by year) | approx. 74-108 Nm (55-80 ft-lb) |
| Wheel size range | 14-20 inches depending on generation/trim |
| Tire size range | 185/70R14 to 245/35R20 depending on generation/trim |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Hyundai Sonata: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Did the Hyundai Sonata bolt pattern ever change?
Yes. The 1998-2005 EF generation used a 4x114.3 mm 4-lug pattern. From the 2006 NF generation onward - through YF, LF and the current DN8 - Hyundai switched to a 5x114.3 mm 5-lug pattern with a 67.1 mm centre bore, which is what nearly all Sonatas on the road today use.
Will 2015 Sonata wheels fit a 2022 Sonata?
The bolt pattern (5x114.3 mm) and centre bore (67.1 mm) match between the LF (2015-2019) and DN8 (2020+) generations, so wheels can physically bolt on, but you still need to match offset, wheel width, and tire size to your specific trim - check the door placard on both cars before assuming a swap will fit correctly.
What lug nut torque should I use on a Hyundai Sonata?
Reported torque for Sonatas with the 5x114.3 mm pattern falls roughly between 74 and 108 Nm (55-80 ft-lb) depending on year and source, so don't rely on a single generic number - use the exact torque specification printed in your own owner's manual, applied with a properly calibrated torque wrench.
What size are the factory tires on my Sonata?
It depends heavily on trim and model year - factory tire sizes across Sonata generations range from about 205/65R15 on base trims up to 245/35R20 on top trims of the current DN8. The size for your exact car is printed on the tire sidewall itself and on the driver's door jamb placard.