Jeep Compass Oil Capacity & Oil Type
TL;DR
First-gen Compass (2007-2016): 4.5 qt (4.3 L), 5W-20. Second-gen Compass 2.4L Tigershark (2017+): 5.5 qt (5.2 L), 0W-20. Always confirm on your own vehicle before topping off.
Jeep Compass oil capacity by engine
The Compass has been built in two very different generations that do not share an engine family, so the correct oil capacity depends on which generation and engine code your vehicle has, not just the model year alone.
First generation (2007-2016)
These models used the 2.0L or 2.4L World Engine (also called ECC/ED3 family). Multiple service-data sources agree on 4.5 US quarts (about 4.3 liters) with a new filter, using SAE 5W-20 oil.
Second generation (2017-present, 2.4L Tigershark)
The 2.4L Tigershark MultiAir2 (engine code ED6, and the EDE MultiAir variant) takes 5.5 US quarts (about 5.2 liters) with a new filter. Chrysler/Mopar specified SAE 0W-20 for this engine on most model years; a small number of early 2017 units were built to a 5W-20 spec before Mopar's oil recommendation was updated, so it is worth double-checking the underhood sticker on early 2017 examples.
Turbo and diesel variants (markets outside North America)
Compass versions sold in Europe, Brazil and other markets have also used a 1.3L turbo (GSE T4), a 1.4L MultiAir turbo, and 1.6L/2.0L Multijet II diesel engines. Reliable, independently confirmed capacity figures for these engines were not found for this guide, so no number is given here - check the oil filler cap or your owner's manual for the exact figure on these versions.
Where to double-check for your exact car
Oil capacity and viscosity can vary by trim and by mid-cycle running changes. Before you buy oil, confirm the figures on your own vehicle using one of these authoritative sources:
- The oil viscosity sticker on the engine oil filler cap
- The Owner's Manual maintenance/capacities section (the printed copy or the manual on the Mopar owners site)
- The VIN-specific service data at a Jeep/Mopar dealership
| Engine code / years | Capacity with filter (L / US qt) | Viscosity |
|---|---|---|
| 2.0L World engine (ECC), 2007-2016 | 4.3 L / 4.5 qt | SAE 5W-20 |
| 2.4L World engine (ED3), 2007-2016 | 4.3 L / 4.5 qt | SAE 5W-20 |
| 2.4L Tigershark MultiAir2 (ED6), 2017-present | 5.2 L / 5.5 qt | SAE 0W-20 (some early 2017 units: 5W-20) |
| 2.4L Tigershark MultiAir (EDE), 2017-present | 5.2 L / 5.5 qt | SAE 0W-20 |
| 1.3L/1.4L turbo and 1.6L/2.0L Multijet diesel (non-US markets) | Not independently confirmed - check filler cap or manual | Check owner's manual |
Summary
| First-gen (2007-2016) capacity | 4.5 US qt / 4.3 L |
|---|---|
| First-gen (2007-2016) viscosity | SAE 5W-20 |
| Second-gen 2.4L Tigershark (2017+) capacity | 5.5 US qt / 5.2 L |
| Second-gen 2.4L Tigershark (2017+) viscosity | SAE 0W-20 |
| Engine codes covered | ECC, ED3, ED6, EDE |
| Turbo/diesel export variants | Capacity not independently confirmed - check manual |
| Authoritative source for your car | Oil filler cap sticker and Owner's Manual |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Jeep Compass: Common Problems, Fault Codes & Repairs.
Frequently asked questions
How much oil does a 2019 Jeep Compass 2.4L take?
A 2019 Compass with the 2.4L Tigershark (ED6) engine takes 5.5 US quarts (about 5.2 liters) with a new oil filter, using SAE 0W-20 oil. Confirm on the filler cap sticker since some builds vary.
Is a 2015 Compass the same capacity as a 2019 Compass?
No. The 2015 model is the first-generation Compass with the 2.0L or 2.4L World engine, which takes 4.5 US quarts (4.3 liters) of 5W-20. The 2019 model is the redesigned second-generation Compass with the 2.4L Tigershark engine, which takes 5.5 US quarts (5.2 liters) of 0W-20. They are different engine families with different capacities.
Can I use 5W-20 instead of 0W-20 in a newer Tigershark Compass?
Mopar's factory specification for the 2.4L Tigershark ED6/EDE engine on most model years is 0W-20. Follow the viscosity printed on your oil filler cap and in your owner's manual, since using the wrong grade can affect cold-start protection and, on turbocharged variants, carbon/LSPI risk.
Where can I find the exact oil capacity for my specific Compass?
The most reliable places are the oil viscosity label on the engine's oil filler cap, the capacities table in your printed or online Owner's Manual, and your Jeep dealership's VIN-specific service data - these reflect the exact engine and running changes for your build.