Nissan Altima Bolt Pattern, Wheel & Tire Sizes
TL;DR
5x114.3 bolt pattern has held from the 2002 L31 generation through today (2026); confirm center bore, exact wheel size, and torque for your specific trim before buying wheels.
Nissan Altima bolt pattern by generation
Multiple wheel-fitment databases agree that every Nissan Altima sold from the 2002 model year (third-generation L31) onward uses a 5x114.3 mm (5x4.5 in) bolt pattern. One older-model reference suggests the very first-generation Altima (1993-1997, U13) may have used a 4x114.3 pattern before the switch to 5-lug, but this was not independently corroborated across sources, so treat that specific early claim with caution and verify physically if you own a 1990s Altima.
Center bore and stud thread
For the 2019-2023 sixth-generation (L34) Altima, sources consistently list a 66.1 mm center bore and M12x1.25 stud thread. For the 2002-2018 generations (L31, L32, L33), we could not find a center-bore figure corroborated by more than one credible source, so no number is stated here for those years - check the marking stamped on your wheel or measure the hub bore directly.
Stock wheel and tire sizes
Wheel and tire sizes vary by trim and engine (four-cylinder versus V6), not just by generation. The table below lists factory sizes actually found in fitment databases for each generation.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| L31 (2002-2006) | 5x114.3 | Not corroborated - check your car | M12x1.25 (commonly reported) | 6.5Jx16, 7Jx17 | 205/65R16, 215/55R17 |
| L32 (2007-2012) | 5x114.3 | Not corroborated - check your car | M12x1.25 (commonly reported) | 7Jx16, 7.5Jx17, 7.5Jx18 | 215/60R16, 215/55R17, 235/45R18 |
| L33 (2013-2018) | 5x114.3 | Not corroborated - check your car | M12x1.25 (commonly reported) | 7Jx16, 7.5Jx17, 7.5Jx18 | 215/60R16, 215/55R17, 235/45R18 |
| L34 (2019-2023) and facelift (2023-2027) | 5x114.3 | 66.1 mm (confirmed) | M12x1.25 (confirmed) | 7Jx16, 7.5Jx17, 8Jx19 | 215/60R16, 215/55R17, 235/40R19 |
Always verify on your own car
Fitment databases aggregate reported specs and occasionally disagree or lack a figure, especially for center bore and lug torque on older years. Before ordering wheels, spacers, or aftermarket lug studs, confirm the exact bolt pattern, center bore, and torque spec using one of these authoritative sources on the vehicle itself: the driver-door jamb placard, the owner's manual, the markings stamped into your factory wheel, or a Nissan dealer parts lookup by VIN.
Summary
| Bolt pattern (2002-present) | 5x114.3 mm (5x4.5 in) |
|---|---|
| Center bore (2019-2023 L34, confirmed) | 66.1 mm |
| Center bore (2002-2018) | Not corroborated - check your wheel |
| Stud thread (L34, confirmed) | M12 x 1.25 |
| Common stock wheel diameters | 16, 17, 18, or 19 inches depending on generation/trim |
| Common tire sizes | 205/65R16, 215/60R16, 215/55R17, 235/45R18, 235/40R19 |
| Authoritative source for your car | Driver-door placard, owner's manual, or wheel markings |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Nissan Altima: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the bolt pattern the same on every Nissan Altima generation?
From the 2002 L31 generation through the current 2023+ facelift, every Altima uses 5x114.3 mm (5x4.5 in). One source suggests the original 1993-1997 U13 generation used a 4x114.3 pattern before switching to 5-lug, but this was not confirmed by a second source, so if you own a 1990s Altima, verify the pattern physically rather than assuming.
What is the center bore on a Nissan Altima?
For the 2019-2023 (L34) generation, fitment databases confirm a 66.1 mm center bore with M12x1.25 stud threads. For 2002-2018 Altimas (L31/L32/L33), no center-bore figure was corroborated across sources, so check the number stamped on your factory wheel or measure your hub directly before buying aftermarket wheels.
What wheel and tire sizes came stock on the Altima?
It depends on generation, trim, and engine. Four-cylinder base trims typically ran 16-inch wheels with 215/60R16 or 205/65R16 tires, mid trims ran 17-inch wheels with 215/55R17, and higher trims or V6 models ran 18-inch (older generations) or 19-inch (2019+) wheels with 235/45R18 or 235/40R19 tires respectively.
Where can I find the exact spec for my specific Altima?
The most reliable sources are on the car itself: the placard on the driver's door jamb (or sometimes the fuel filler flap), the owner's manual, the raised markings on the back of your stock wheel, or a Nissan dealer parts department doing a VIN lookup. Aftermarket databases are a good starting point but occasionally disagree between each other.