Nissan Sentra Bolt Pattern, Wheel & Tire Sizes
TL;DR
Do not assume one pattern fits every Sentra - older compact-era cars use 4x100, newer ones use 5x114.3. Always confirm on your own vehicle before buying wheels.
Bolt pattern changed over the Sentra's history
The Nissan Sentra has been built across several distinct chassis generations, and the wheel bolt pattern is not the same across all of them. Older, smaller Sentras (B13, B14, B15 - roughly 1991 through 2006) used a 4x100 bolt pattern, common on compact economy cars of that era. Starting with the B16 generation (around 2007) and continuing through the B17 (2013-2019) and the current B18 (2020-2026), Nissan moved to a 5x114.3 bolt pattern, which is confirmed for the B17 and B18 cars along with a 66.1 mm center bore and M12 x 1.25 wheel studs on the B17.
What we could and could not confirm
For the B18 (current, 2020-2026), the 5x114.3 pattern and 66.1 mm center bore are confirmed for recent model years, but we could not independently verify the exact stud thread for every trim, so treat M12 x 1.25 as likely (matching the prior generation) rather than guaranteed. For the earliest generations (B13-B15), we found the 4x100 pattern referenced but could not confirm exact center bore or thread specs, so those cells are left qualitative rather than invented.
Wheel and tire sizes vary by trim
Stock wheel diameter grew over time: early cars typically rode on 13-14 inch steel wheels, mid-generation cars moved to 15-16 inch wheels, and the current B18 offers 16 inch wheels as standard with a 17 inch wheel on the SV Premium Package. Because tire size depends heavily on trim level and model year, always check your own tire sidewall rather than relying on a single number for the whole generation.
| Generation / years | Bolt pattern | Center bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| B13 (1991-1994) | 4x100 (sources vary) | Not independently confirmed - check your hub | Not independently confirmed | Typically 13-14 in | Varies by trim - check sidewall |
| B14 (1995-1999) | 4x100 (sources vary) | Not independently confirmed - check your hub | Not independently confirmed | Typically 14 in | Varies by trim - check sidewall |
| B15 (2000-2006) | 4x100 (sources vary) | Not independently confirmed - check your hub | Not independently confirmed | Typically 14-15 in | Varies by trim - check sidewall |
| B16 (2007-2012) | 5x114.3 | Not independently confirmed for this generation - check your hub | Not independently confirmed | Typically 15-16 in | Varies by trim - check sidewall |
| B17 (2013-2019) | 5x114.3 | 66.1 mm | M12 x 1.25 | 16-17 in depending on trim | Varies by trim (commonly 195/65R16 or 205/55R16 range) - check sidewall |
| B18 (2020-2026, current) | 5x114.3 | 66.1 mm | Likely M12 x 1.25 (matches prior gen, not independently reconfirmed) | 16 in standard, 17 in on SV Premium Package | 205/55R16 on standard-wheel trims - check sidewall for others |
Where to get the exact numbers for your own car
Because trim packages and running production changes can shift these figures within a single generation, the only fully reliable source for your specific Sentra is your own vehicle: check the driver's door jamb placard, your owner's manual, the markings stamped into the sidewall of your current tires, and - for towing or load-related specs - Nissan's manufacturer towing guide. A wheel shop can also measure your hub directly before you buy aftermarket wheels.
Summary
| Older generations (B13-B15, 1991-2006) | 4x100 bolt pattern (sources vary on exact spec) |
|---|---|
| Newer generations (B16-B18, 2007-2026) | 5x114.3 bolt pattern |
| Center bore (B17, 2013-2019) | 66.1 mm |
| Center bore (B18, 2020-2026) | 66.1 mm |
| Stud thread (B17, 2013-2019) | M12 x 1.25 |
| Standard wheel size (B18, current) | 16 in (17 in on SV Premium Package) |
| Standard tire size (B18, current) | 205/55R16 on standard-wheel trims |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Nissan Sentra: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the Nissan Sentra bolt pattern the same on every generation?
No. Earlier Sentras (B13, B14, B15, roughly 1991-2006) used a 4x100 bolt pattern, while the B16 generation onward (2007 through today's B18, 2020-2026) switched to 5x114.3. Always match wheels to your specific generation, not the model name alone.
What center bore do I need for a 2013-2019 or 2020-2026 Nissan Sentra?
For the B17 (2013-2019) and B18 (2020-2026) Sentra, a 66.1 mm center bore is confirmed. If you are fitting aftermarket wheels with a larger factory bore opening, use hub-centric rings to take up the gap safely.
Can I use the same wheels on an older 4x100 Sentra and a newer 5x114.3 Sentra?
No. The bolt patterns are physically different (four studs versus five, and different spacing), so wheels are not interchangeable between the older 4x100-era Sentras and the 5x114.3-era cars from 2007 onward.
Where can I find the exact stock tire size for my Sentra trim?
Check the tire information placard on your driver's door jamb, your owner's manual, or simply read the size printed on the sidewall of your current factory tires - this is the most reliable source since sizes vary by trim and model year.