Subaru Crosstrek Bolt Pattern, Wheel & Tire Sizes

Quick answer: The 2013-2023 Subaru Crosstrek (GP and GT generations) uses a 5x100 bolt pattern with a 56.1mm center bore, while the redesigned 2024-and-newer GU generation switched to 5x114.3 (shared with the redesigned Impreza). Always confirm against your own vehicle before buying wheels.

TL;DR

Bolt pattern changed mid-model: 5x100 for 2013-2023 Crosstreks, 5x114.3 for 2024+ models. Center bore is commonly listed at 56.1mm across generations, but verify it for your exact car.

Why the bolt pattern is not the same on every Crosstrek

Subaru redesigned the Crosstrek for the 2024 model year alongside a redesigned Impreza, and the bolt pattern changed along with the platform. Earlier Crosstreks (2013-2023, generations known as GP and GT) use the long-standing Subaru compact-car pattern of 5x100. The 2024-and-later GU generation moved to 5x114.3, the pattern already used on Subaru's larger models such as the Forester, Outback and Ascent. If you assume every Crosstrek shares one pattern you can order wheels that will not physically bolt on.

Center bore and stud thread

Multiple wheel-fitment retailers list a 56.1mm center bore and M12x1.25 stud thread for the 2013-2023 cars. Those same figures are commonly repeated for the 2024+ GU generation as well, but because the bolt pattern itself changed at that redesign, treat the bore and thread figures for 2024+ as unconfirmed until you check them against your own wheel or a shop's fitment gauge.

Stock wheel and tire sizes

Wheel and tire sizes vary by trim and model year. The table below reflects factory (OE) fitments reported for each generation.

Generation / yearsBolt patternCentre boreStud threadStock wheel sizesCommon tire sizes
GP (2013-2017)5x10056.1 mmM12x1.2517x7 ET48; 18x7.5 ET48 / 18x8 ET45225/55R17; 225/50R18; 245/45R18
GT / GT Facelift (2018-2023)5x10056.1 mmM12x1.2517x7 ET55; 18x7 or 18x7.5 ET55; 19x8 ET48 (limited trims)225/60R17; 225/55R18; 245/55R17; 245/50R18; 245/45R19
GU (2024-present)5x114.356.1 mm (commonly reported, verify on your car)M12x1.25 (commonly reported, verify on your car)17x7 ET55 (Base/Premium); 18-inch (Sport/Limited)215/60R17 (Base/Premium); 225/55R18 (Sport/Limited)

Where to get the number that actually applies to your car

Because this pattern changed once already, do not trust a single generic answer. The authoritative source for your specific Crosstrek is the driver's door jamb placard (also lists correct tire size and pressure), the tire and wheel markings stamped into your current tires and rims, your owner's manual, and if you are ever towing or need axle/wheel torque specs, Subaru's official towing guide or dealer parts department.

Lug nut torque

Retailer references for the Crosstrek commonly cite a lug torque of approximately 89 ft-lb (about 120 Nm). Torque specs can vary slightly by model year and wheel type (steel vs alloy), so confirm the figure printed in your owner's manual before tightening.

Summary

Bolt pattern (2013-2023, GP/GT)5x100
Bolt pattern (2024+, GU)5x114.3
Centre bore (commonly reported)56.1 mm
Stud thread (commonly reported)M12x1.25
Typical wheel sizes17-inch to 19-inch, depending on trim and year
Common tire sizes215/60R17, 225/60R17, 225/55R18, 245/45R19 (trim-dependent)
Reported lug torque~89 ft-lb (120 Nm), confirm in owner's manual

Full diagnostics

For the complete step-by-step diagnostic and repair guide, see Subaru Crosstrek: Common Problems, Fault Codes & Repairs.

Frequently asked questions

Did Subaru really change the Crosstrek bolt pattern?

Yes. The 2013-2023 Crosstrek (GP and GT generations) uses a 5x100 bolt pattern. When Subaru redesigned the Crosstrek for 2024 on a new platform shared with the redesigned Impreza, the pattern changed to 5x114.3, matching Subaru's larger SUVs. Wheels made for one pattern will not fit the other.

What center bore do Crosstrek wheels use?

A 56.1mm center bore is widely reported for the Crosstrek across generations. This figure is well corroborated for 2013-2023 models; for 2024+ models it is commonly repeated by retailers but you should double-check it against your own wheel or a shop's fitment gauge, since the bolt pattern itself changed with the redesign.

Can I put 2020 Crosstrek wheels on a 2024 Crosstrek?

No, not directly. The 2020 model (GT generation) uses a 5x100 bolt pattern while the redesigned 2024 model (GU generation) uses 5x114.3. The bolt patterns are physically incompatible without an adapter, and adapters are not recommended for daily use due to safety and fitment concerns.

Where can I find the exact factory tire size for my Crosstrek?

Check the placard on the driver's door jamb, which lists the factory tire size and recommended pressure for your specific trim, or look at the sidewall markings on your current tires. Your owner's manual will also list the correct size and any trim-specific variations.

Where the binding figure is on your car

The figures on this page are per-generation references compiled from manufacturer documentation and established fitment databases. Where your own vehicle disagrees with them, your vehicle is right.