Volkswagen Jetta Bolt Pattern, Wheel & Tire Sizes
TL;DR
Pre-2005/2006 Jettas (Mk3/Mk4) use a 5x100 mm bolt pattern; Mk5 (A5, 2005-2010) onward through the current Mk7 (A7) use 5x112 mm. Center bore is commonly listed as 57.1 mm with M14x1.5 wheel bolts across these generations, but verify on your car.
Volkswagen Jetta bolt pattern by generation
The Jetta's wheel bolt pattern is not the same across its whole production run. Fitment databases (wheel-sizes.com, tirewheelguide.com and boltpattern-focused listings) agree that VW switched the Jetta from a 5x100 mm pattern to 5x112 mm when the car moved to the Mk5/A5 generation in the mid-2000s. Because different sources place the exact cutover between 2005 and 2006, treat that boundary as approximate rather than a hard date.
What is consistently reported
- Mk3/Mk4 (A3/A4, roughly 1993-2005): 5x100 mm bolt pattern.
- Mk5 (A5, 2005-2010): switched to 5x112 mm.
- Mk6 (A6, 2011-2018) and Mk7 (A7, 2019-present): continued with 5x112 mm.
Center bore and stud thread
Aftermarket wheel-spacer and hub-centric ring listings consistently cite a 57.1 mm center bore and M14x1.5 wheel bolts for both the 5x100 and 5x112 Jetta eras. This is typical for Volkswagen Group cars of this size, but it was not independently confirmed against VW's own factory documentation, so double-check it against your wheel markings or a shop's hub gauge before relying on it for a hubcentric-ring or spacer purchase.
Wheel and tire sizes
Factory wheel diameters have ranged from 15 to 18 inches depending on trim and generation, with commonly seen OEM tire sizes including 195/65R15, 205/55R16, 205/60R16, 215/55R17 and 225/45R18. Exact sizing depends heavily on trim level (S, SE, SEL, GLI) and factory options, so treat these as the range you are likely to encounter rather than a single spec for every Jetta.
Always verify on your own vehicle
Bolt pattern, center bore and factory tire size can vary by trim and even by production date within a single model year. Before ordering wheels, spacers or replacement tires, check the driver's door jamb placard, the markings stamped into your current wheels, or your owner's manual - these reflect the exact configuration of your specific car.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| Mk3/Mk4 (A3/A4), approx. 1993-2005 | 5x100 mm | ~57.1 mm (commonly reported, verify on car) | M14x1.5 (commonly reported, verify on car) | 15-16 in | 195/65R15, 205/55R16 |
| Mk5 (A5), 2005-2010 | 5x112 mm | ~57.1 mm (commonly reported, verify on car) | M14x1.5 (commonly reported, verify on car) | 15-17 in | 195/65R15, 205/55R16, 215/45R17 |
| Mk6 (A6), 2011-2018 | 5x112 mm | ~57.1 mm (commonly reported, verify on car) | M14x1.5 (commonly reported, verify on car) | 15-17 in | 195/65R15, 205/55R16, 215/45R17 |
| Mk7 (A7), 2019-present | 5x112 mm | ~57.1 mm (commonly reported, verify on car) | M14x1.5 (commonly reported, verify on car) | 16-18 in | 205/60R16, 215/55R17, 225/45R18 |
Summary
| Mk3/Mk4 bolt pattern | 5x100 mm (approx. 1993-2005) |
|---|---|
| Mk5-Mk7 bolt pattern | 5x112 mm (2005/2006-present) |
| Center bore (commonly reported) | ~57.1 mm - verify on your car |
| Wheel bolt thread (commonly reported) | M14x1.5 - verify on your car |
| Stock wheel diameter range | 15-18 inches depending on trim/year |
| Common OEM tire sizes | 195/65R15 to 225/45R18 |
| Authoritative source for your car | Driver's door placard, owner's manual, wheel markings |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Volkswagen Jetta: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Did the Volkswagen Jetta bolt pattern ever change?
Yes. Fitment databases agree the Jetta used a 5x100 mm bolt pattern through the Mk3/Mk4 generations (roughly 1993-2005), then switched to 5x112 mm starting with the Mk5 (A5) around 2005-2006, and has stayed at 5x112 mm through the current Mk7 (A7). Do not assume older Jetta wheels fit a newer one, or vice versa, without checking.
What is the Jetta's center bore and lug/bolt thread size?
Aftermarket wheel-spacer and hub-ring listings commonly cite a 57.1 mm center bore and M14x1.5 wheel bolts across both the 5x100 and 5x112 Jetta eras. This figure was not independently confirmed against Volkswagen's own factory specification, so verify it against the markings on your current wheels or with a shop's hub gauge before buying spacers or hub-centric rings.
What tire sizes come stock on a Jetta?
It depends heavily on trim and generation. Older/base trims commonly ran 195/65R15 or 205/55R16, mid trims 215/45R17 or 215/55R17, and higher trims on the current Mk7 up to 225/45R18. Check your tire's sidewall or the door-jamb placard for your car's exact factory size.
Where can I find the exact wheel specs for my specific Jetta?
The most reliable source is your own vehicle: check the tire and loading information placard on the driver's door jamb, the markings stamped into your current wheels, your owner's manual, or Volkswagen's official parts/towing documentation. These reflect your car's exact trim and configuration, which generic spec lists cannot guarantee.