Volkswagen Virtus Bolt Pattern, Wheel & Tire Sizes
TL;DR
Brazilian-market Virtus: 5x100 bolt pattern, 57.1 mm centre bore, 15-17 inch factory wheels - unchanged so far across the two generations sold to date.
Volkswagen Virtus wheel and tire specifications (Brazil / Latin America)
This page covers the Brazil/Latin-America market Virtus, the sedan built on the MQB-A0 platform (shared with the Polo, Nivus and T-Cross) and sold across South America, Mexico and other Latin-American markets since 2018. Figures below come from wheel-fitment references and tire-shop listings for this version; if your car was sold in another region (for example India, where a related but mechanically different Virtus is built locally), always confirm on your own vehicle before buying parts.
Bolt pattern and centre bore
Across both generations sold so far, the Virtus uses a 5x100 mm bolt pattern (5 studs on a 100 mm circle) with a 57.1 mm centre bore, which is the common MQB-A0 fitment also used on the Polo and T-Cross. Multiple fitment sources agree on these two figures. Wheel bolt thread is most commonly listed as M14 x 1.5 for this platform, but thread size was less consistently documented across sources - verify it against the bolts already on your car or your dealer's parts catalogue before ordering aftermarket bolts.
Stock wheel and tire sizes
Factory wheel diameters run from 15 to 17 inches depending on trim and model year, with the sportier GTS/R-Line-type trims sometimes fitted with 17-inch alloys. Commonly listed tire sizes for this range are 195/65R15, 205/55R16, 205/50R17 and 215/45R17; some older/base configurations reference 14-inch wheels with 175/70R14 or 185/70R14 tires. Exact wheel and tire size is tied to the specific trim (Comfortline, Highline, GTS, etc.) and model year, so treat this as the general range rather than a single fixed spec.
Always verify on your own vehicle
Because trims, markets and model years vary, the single most reliable source for your exact car is your own vehicle, not a general reference page. Check:
- The driver's door jamb placard (sticker on the door pillar) - lists the factory tire size and pressures
- The owner's manual - lists approved wheel and tire combinations
- The markings stamped on your current wheels and tire sidewalls
- Your dealer's parts department or manufacturer parts catalogue, which can confirm bolt pattern, centre bore and bolt thread for your exact VIN
Generations at a glance
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| Virtus Mk1 (2018-2022), Brazil/LatAm | 5x100 | 57.1 mm | M14 x 1.5 (commonly reported) | 14-17 in | 175/70R14, 195/65R15, 205/55R16, 205/50R17, 215/45R17 |
| Virtus facelift (2023-present), Brazil/LatAm | 5x100 | 57.1 mm | M14 x 1.5 (commonly reported) | 15-17 in | 195/65R15, 205/55R16, 205/50R17, 215/45R17 |
Summary
| Market covered | Brazil / Latin America |
|---|---|
| Bolt pattern | 5x100 mm |
| Centre bore | 57.1 mm |
| Stud thread | M14 x 1.5 (commonly reported, verify locally) |
| Stock wheel sizes | 14-17 inch depending on trim |
| Common tire sizes | 175/70R14 to 215/45R17 |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Volkswagen Virtus: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the Volkswagen Virtus bolt pattern the same on every generation?
For the Brazil/Latin-America Virtus, both the original 2018-2022 model and the 2023-present facelift use a 5x100 mm bolt pattern, since they share the same MQB-A0-based platform. This page does not cover the India-built Virtus, which rides on a related but separate platform (shared with the Taigun/Kushaq/Slavia) - if that is your car, confirm the pattern locally before assuming it matches.
What is the centre bore on a Volkswagen Virtus?
Fitment references consistently list 57.1 mm as the centre bore for the Brazil/LatAm Virtus, matching the wider MQB-A0 family (Polo, T-Cross). Use a hub-centric ring if you fit aftermarket wheels with a larger bore opening.
Can I fit 17-inch wheels on my Virtus?
Yes - 17-inch alloy wheels (typically with 205/50R17 or 215/45R17 tires) are factory-fitted on higher trims such as GTS, so 17-inch wheels are within the range VW itself uses on this platform. Confirm offset and load rating match your specific trim before switching wheel sizes.
What wheel bolt thread size does the Virtus use?
Most fitment guides for this MQB-A0-based platform list M14 x 1.5 wheel bolts, but this figure was less consistently corroborated across sources than the bolt pattern and centre bore. Check the bolts already fitted to your car, or ask your dealer's parts department, before ordering replacement wheel bolts.