Fiat Strada Oil Capacity & Oil Type

Quick answer: On the Brazil/Latin-America market Fiat Strada (the primary version of this pickup worldwide), the second-generation 1.3 Firefly engine (2020-present, naturally aspirated or Turbo 200) takes about 3.36 L (3.6 US qt) of full-synthetic 0W-20 with the filter changed. The older 1.4 Fire 8V engine (pre-2020 and early transition models) uses roughly 3.5 L (3.7 US qt) of 15W-40.

TL;DR

Firefly 1.3 (2020+): about 3.36 L / 3.6 qt of 0W-20. Older 1.4 Fire 8V: about 3.5 L / 3.7 qt of 15W-40. Always confirm on your own vehicle before topping up.

Which Strada is this

The Fiat Strada is built and sold primarily in Brazil and exported across Latin America, so this page treats the Brazilian-market Strada as the reference vehicle. Two very different engine families have powered it, and mixing up their oil specs is the most common mistake owners make.

Engine generations

The first-generation Strada (2001-2020) and the early cab of the second generation were powered by the Fire 1.4 8V engine, a long-running naturally aspirated unit shared with the Uno and Palio. From 2020, the redesigned second-generation Strada switched to the Firefly family: a 1.3-litre naturally aspirated unit and, from 2021, a 1.3-litre turbocharged version marketed as Turbo 200. Both Firefly variants share the same oil system and capacity.

Capacity and viscosity by engine

Engine code / yearsCapacity with filter (L / US qt)Viscosity
Fire 1.4 8V (2001-2020, incl. early Gen 2 transition)approx. 3.5 L / 3.7 US qt15W-40 (mineral or semi-synthetic, e.g. Selenia K)
Firefly 1.3 8V naturally aspirated (2020-present)3.36 L / 3.6 US qt (3.19 L crankcase only)0W-20 full synthetic (API SP / ILSAC GF-6A)
Firefly Turbo 200, 1.3 turbo (2021-present)3.36 L / 3.6 US qt (3.19 L crankcase only)0W-20 full synthetic (API SP / ILSAC GF-6A)

Where to double-check

Because the same nameplate spans two very different engines, treat any online figure as a starting point, not the final word for your exact truck. Confirm on your own vehicle using:

  • The engine oil filler cap or the sticker under the hood
  • The owner's manual chapter on lubricants and capacities
  • The dipstick, which for the Firefly engine is integrated into the cylinder head cover
  • Your dealership's service data, especially if the truck has had an engine swap or major service

Why it matters

Overfilling or underfilling, or using the wrong viscosity, can cause oil starvation, foaming, or excess consumption. The Firefly engines require full-synthetic 0W-20 for correct variable valve timing and emissions performance, while the older Fire engine tolerates the thicker 15W-40 that Brazilian mechanics have used on it for two decades.

Summary

Market coveredBrazil / Latin America (primary Strada market)
Fire 1.4 8V capacity (with filter)approx. 3.5 L / 3.7 US qt
Fire 1.4 8V viscosity15W-40
Firefly 1.3 (NA) capacity (with filter)3.36 L / 3.6 US qt
Firefly Turbo 200 capacity (with filter)3.36 L / 3.6 US qt
Firefly viscosity0W-20 full synthetic
Where to confirmFiller cap sticker, owner's manual, dipstick

Full diagnostics

For the complete step-by-step diagnostic and repair guide, see Fiat Strada: Common Problems, Fault Codes & Repairs.

Frequently asked questions

Does the Fiat Strada Firefly 1.3 and the Turbo 200 use the same oil capacity?

Yes. Both the naturally aspirated 1.3 Firefly and the 1.3 Firefly Turbo 200 share the same block and lubrication system, taking about 3.36 L (3.6 US qt) of 0W-20 full synthetic oil with the filter changed.

Can I use 15W-40 in a 2021+ Strada with the Firefly engine?

No. The Firefly family (naturally aspirated and Turbo 200) is engineered around thinner 0W-20 full-synthetic oil for its variable valve timing and emissions control; using 15W-40 in it is not the manufacturer specification. 15W-40 applies to the older Fire 1.4 8V engine.

How much oil does an older Fiat Strada with the 1.4 Fire engine need?

Sources point to roughly 3.5 L (about 3.7 US qt) with the filter changed, using 15W-40 mineral or semi-synthetic oil. Because this engine has been produced over two decades with minor revisions, verify the exact figure on your filler cap sticker or owner's manual.

Where is the most reliable place to check my exact Strada's oil capacity?

Check the sticker on or near the oil filler cap, the lubricants table in your owner's manual, and the dipstick markings (integrated into the cylinder head cover on Firefly engines). These are specific to your VIN and trim and override any general online figure.

Where the binding figure is on your car

The figures on this page are per-generation references compiled from manufacturer documentation and established fitment databases. Where your own vehicle disagrees with them, your vehicle is right.