Fiat Strada Bolt Pattern, Wheel & Tire Sizes
TL;DR
On the Brazil/LatAm Strada (2004-2020 and 2020-present), the bolt pattern is 4x98 with a 58.1 mm centre bore and M12 x 1.25 wheel studs; stock wheels run 14 to 16 inches depending on trim and engine. The earliest 1996-2003 first-generation Strada could not be verified from current sources here, so no numbers are given for it - check your own vehicle for that generation.
Which Strada this page covers
The Fiat Strada is a compact pickup sold mainly in Brazil and other Latin American markets, built on Fiat's small-car platforms (shared with the Uno/Palio/Argo family depending on era). This page treats the Brazil/LatAm version as the primary subject. A European-market Strada also existed in earlier years, but volumes and available fitment data are much smaller, so figures below are the Latin American specification unless noted.
Bolt pattern and centre bore by generation
Independent wheel-fitment databases show the same bolt circle for both generations that could be verified: 4x98 (4 studs on a 98 mm circle), a 58.1 mm centre bore, and M12 x 1.25 stud threads. This applies to the 2004-2020 generation (codename 278, the long-running "classic" Strada) and to the all-new 2020-2027 generation (codename 281). The original 1996-2003 first-generation Strada (based on the Fiat Fiorino/Uno pickup of that era) could not be confirmed against a credible source in this research pass - rather than guess, we recommend reading the bolt pattern directly off that vehicle or its parts catalogue if you own one.
Stock wheel and tire sizes
Wheel and tire sizes vary by engine and trim level:
- 2020-2027 Strada (1.3 Firefly, 1.3 Flex, 1.4 Fire/Flex engines): stock combinations include 195/65R15 on 6Jx15 wheels, and 205/60R16 or 205/55R16 on 6Jx16 wheels, with a 5.5Jx15 option also offered.
- 2004-2020 Strada: entry 1.4i versions used 175/70R14 on 5.5Jx14 wheels (with 175/65R15 or 195/60R15 alternatives), while 1.6i and 1.8i versions used 205/65R15 or 205/70R15 on 15-inch wheels, with 16 and 17-inch alternatives (up to 205/55R17) listed for some trims.
Where to double-check for your exact vehicle
Because trims, factory options and regional specification differ, always confirm the exact figures for your own truck using these authoritative, vehicle-specific sources: the driver's door jamb placard, the tire/pressure label often found on the fuel filler flap or B-pillar, the owner's manual, the markings stamped into your current wheels and tires, and Fiat's official parts/wheel catalogue for your exact model year and trim.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| 1st gen, 1996-2003 (Fiorino/Uno-based, EU + LatAm) | Not verified in this research - check vehicle placard | Not verified - check vehicle placard | Not verified - check vehicle placard | Not verified | Not verified |
| 2nd gen, 2004-2020 (code 278, Brazil/LatAm main version) | 4x98 | 58.1 mm | M12 x 1.25 | 14-17 in depending on engine/trim (5.5Jx14 to 6Jx17) | 175/70R14, 175/65R15, 195/60R15, 205/65R15, 205/70R15, 205/55R17 |
| 3rd gen, 2020-2027 (code 281, current Brazil/LatAm Strada) | 4x98 | 58.1 mm | M12 x 1.25 | 15-16 in depending on engine/trim (5.5Jx15 to 6Jx16) | 195/65R15, 205/60R16, 205/55R16 |
Summary
| Primary market covered | Brazil / Latin America |
|---|---|
| Bolt pattern (2004-2020 & 2020-2027) | 4x98 |
| Centre bore (2004-2020 & 2020-2027) | 58.1 mm |
| Stud thread (2004-2020 & 2020-2027) | M12 x 1.25 |
| Stock wheel sizes, current gen | 15-16 in (6Jx15 / 6Jx16) |
| Stock wheel sizes, 2004-2020 gen | 14-17 in depending on engine |
| 1996-2003 first gen figures | Not verified - check your vehicle placard |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Fiat Strada: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the Fiat Strada bolt pattern the same on every generation?
For the two generations we could verify - the 2004-2020 model (code 278) and the current 2020-2027 model (code 281) - the bolt pattern is the same: 4x98 with a 58.1 mm centre bore and M12 x 1.25 studs. We could not confirm the figures for the original 1996-2003 first generation from a credible source, so treat that older truck separately and check its own placard or parts catalogue rather than assuming it matches the newer trucks.
What size are the stock wheels on a Fiat Strada?
It depends on generation and engine. The current (2020-2027) Strada typically rides on 15 or 16-inch wheels (6Jx15 or 6Jx16) with tires such as 195/65R15 or 205/60R16. The 2004-2020 Strada ranged from 14-inch wheels on base 1.4i versions (175/70R14) up to 15, 16 or even 17-inch wheels on higher-output 1.6i/1.8i versions.
How many lug nuts or bolts does a Fiat Strada have?
Both verified generations (2004-2020 and 2020-2027) use a 4-stud (4x98) bolt pattern, so there are 4 wheel fasteners per wheel, with M12 x 1.25 thread. Always match new wheels or lug bolts to this thread pitch and pattern, and confirm using your own vehicle's markings since aftermarket wheels can carry incorrect labeling.
Where can I find the exact wheel specs for my specific Fiat Strada?
The most reliable source is your own vehicle: check the placard on the driver's door jamb, the tire-pressure/spec label (commonly on the fuel filler flap or B-pillar), the owner's manual, and the size markings stamped on your current wheels and tires. These reflect the exact trim and factory configuration of your truck, which can vary even within the same generation.