Honda HR-V Oil Capacity & Oil Type
TL;DR
First-generation US HR-V (1.8L, 2016-2022) holds roughly 3.9 qt / 3.7 L of 0W-20 with filter; the redesigned 2023+ HR-V (2.0L) holds roughly 4.4 qt / 4.2 L of 0W-20.
Honda HR-V oil capacity by engine
The Honda HR-V sold in the US changed engines completely when it was redesigned for 2023, so the correct oil fill depends on which generation and engine you actually have, not just the model name.
First generation (2016-2022)
These HR-Vs use the 1.8L SOHC i-VTEC four-cylinder, engine code R18Z1 (the same family used in the Honda Fit). Oil-change data sources consistently list about 3.9 US qt (3.7 L) with a filter change, using 0W-20 full synthetic.
Second generation (2023-present)
The redesigned HR-V shares its platform and engine with the 11th-generation Civic. It uses a 2.0L DOHC i-VTEC four-cylinder, engine code K20C2, which is a larger and different engine than the outgoing 1.8L. Sources list about 4.4 US qt (4.2 L) with a filter change, also 0W-20 full synthetic.
Why this matters
Because the two generations use genuinely different engines (not just an updated version of the same one), applying the first-generation figure to a 2023+ model - or vice versa - will leave the engine under- or over-filled. Always match the capacity to your exact engine code, not just the model year range.
| Engine code / years | Capacity with filter (L / US qt) | Viscosity |
|---|---|---|
| R18Z1 - 1.8L SOHC i-VTEC (2016-2022) | 3.7 L / 3.9 qt | 0W-20 full synthetic |
| K20C2 - 2.0L DOHC i-VTEC (2023-present) | 4.2 L / 4.4 qt | 0W-20 full synthetic |
Where to double-check
Before you buy oil, confirm the exact figure and grade for your specific car using one of these on-vehicle sources:
- The owner's manual (glovebox or digital copy)
- The engine oil filler cap, which is often stamped with the recommended viscosity
- The driver's door jamb placard, which lists factory-fill specifications for your exact build
Summary
| 1st gen (2016-2022) engine | 1.8L SOHC i-VTEC, code R18Z1 |
|---|---|
| 1st gen capacity with filter | 3.7 L / 3.9 US qt |
| 1st gen viscosity | 0W-20 full synthetic |
| 2nd gen (2023-present) engine | 2.0L DOHC i-VTEC, code K20C2 |
| 2nd gen capacity with filter | 4.2 L / 4.4 US qt |
| 2nd gen viscosity | 0W-20 full synthetic |
| Best source to confirm | Owner's manual, oil filler cap, or door jamb placard |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Honda HR-V: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Does the 2023 Honda HR-V take the same oil as the 2022 model?
No. The 2022 and earlier HR-V uses a 1.8L engine (code R18Z1) with about 3.9 qt (3.7 L) capacity, while the redesigned 2023+ HR-V uses a completely different 2.0L engine (code K20C2) with about 4.4 qt (4.2 L) capacity. Both use 0W-20, but the fill amount differs, so check your engine code before topping off.
What oil viscosity does the Honda HR-V need?
Both the 2016-2022 1.8L engine and the 2023+ 2.0L engine specify 0W-20 full synthetic oil in North American Honda service data. Always confirm with your owner's manual since regional versions of the HR-V sold outside North America may specify a different grade.
Where can I find the exact oil capacity for my specific HR-V?
Check your owner's manual, the sticker on the oil filler cap, or the maintenance section of your Honda's onboard computer. If those aren't available, a dealer or independent shop can pull the exact factory-fill spec using your VIN.
Is the oil capacity different with or without a filter change?
Yes. Because some oil stays trapped in the old filter and housing, capacities without a filter change are typically about 0.2 qt (roughly 0.2 L) lower than a full service that includes a new filter. The figures in this article are for a complete oil-and-filter change.