Jeep Renegade Oil Capacity & Oil Type
TL;DR
Capacity and viscosity differ by engine code - always match your specific engine, not just the model year, before topping off.
Jeep Renegade oil capacity by engine
The Renegade (BU platform, 2015-2023 in North America) was sold with three different gasoline engines over its life, and each one has a distinct oil capacity and factory-recommended viscosity, confirmed directly from manufacturer specification sheets. Using the wrong figure - for example applying the 2.4L Tigershark capacity to a 1.3L Turbo - will leave the engine overfilled or underfilled.
Verified capacities and viscosities
| Engine code / years | Capacity with filter (L / US qt) | Viscosity |
|---|---|---|
| 1.4L MultiAir Turbo I-4 (2015-2018, Sport/Latitude) | 3.8 L / 4.0 qt (dry fill, with new filter) | SAE 5W-40 full synthetic |
| 2.4L Tigershark MultiAir2 I-4 (2015-2022, all trims) | 5.2 L / 5.5 qt (total system fill) | SAE 0W-20 full synthetic |
| 1.3L GSE T4 Turbo I-4 (2019-2022, replaced the 1.4L) | 4.3 L / 4.5 qt (dry fill, with new filter) | SAE 0W-30 full synthetic |
Why the capacity is not one single number
Jeep's own North American specification sheets (manufacturer media specs for model years 2017 and 2019) list the capacities above directly next to each engine's technical data, confirming they are not interchangeable. The 1.3L Turbo replaced the 1.4L Turbo starting with the 2019 model year on most trims, while the 2.4L Tigershark ran alongside both across the whole generation.
Where to confirm your exact vehicle
Because build combinations (trim, model year, engine option) vary, always confirm the final figure for your own car using one of these authoritative sources before an oil change:
- The oil-fill or engine specification page in your owner's manual, which is matched to your exact engine code.
- The oil filler cap, which is often stamped with the recommended viscosity grade.
- Your VIN decoded at a dealership or parts counter, which identifies the exact engine installed.
Practical advice for oil changes
Add oil gradually and check the dipstick rather than pouring the full listed quantity in one go, since factory figures already assume a new filter and can vary slightly with production tolerances.
Summary
| 2.4L Tigershark capacity | 5.5 US qt / 5.2 L (total) |
|---|---|
| 2.4L Tigershark viscosity | SAE 0W-20 full synthetic |
| 1.3L Turbo capacity | 4.5 US qt / 4.3 L (with filter) |
| 1.3L Turbo viscosity | SAE 0W-30 full synthetic |
| 1.4L Turbo capacity | 4.0 US qt / 3.8 L (with filter) |
| 1.4L Turbo viscosity | SAE 5W-40 full synthetic |
| Confirm for your VIN | Owner's manual or oil filler cap |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Jeep Renegade: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Does the Jeep Renegade oil capacity change between engines?
Yes. The 2.4L Tigershark takes 5.5 quarts (5.2 liters) total, the 1.3L Turbo takes 4.5 quarts (4.3 liters) with the filter, and the earlier 1.4L Turbo takes 4.0 quarts (3.8 liters) with the filter. Always match the figure to your specific engine code, not just the model year.
What oil viscosity does the Jeep Renegade need?
It depends on the engine: the 2.4L Tigershark calls for SAE 0W-20 full synthetic, the 1.3L Turbo calls for SAE 0W-30 full synthetic, and the 1.4L Turbo calls for SAE 5W-40 full synthetic. Check your owner's manual or oil filler cap to confirm which engine and grade applies to your vehicle.
How do I know which engine is in my Renegade?
Check the engine specification section of your owner's manual, look for a badge on the tailgate or engine cover, or have your VIN decoded at a Jeep dealership parts counter. Engine choice depended on trim level and model year, so two Renegades from the same year can have different engines.
Is it safe to slightly overfill or underfill the Renegade's engine oil?
No - both overfilling and underfilling can cause damage over time, from aeration and foaming to inadequate lubrication. Add oil in stages and confirm the level on the dipstick rather than assuming the listed capacity will land exactly on the full mark for your specific vehicle.