Nissan Versa Tire Pressure (Recommended PSI)

Quick answer: For the Brazil/Latin American Nissan Versa sedan we could not independently verify a placard-specific PSI figure from a Brazil source, so treat this as a starting point, not a substitute for your own door placard. On the closely related North American Versa (same platform family, sold 2012-2019 and 2020-2026), verified sources show 33 PSI front and rear on most trims and tire sizes (15-inch, 16-inch and 17-inch), with one older exception (2012 SL on 16-inch wheels at 35 PSI). Always confirm the exact number for your trim on the driver-door jamb sticker.

TL;DR

Most Versa sedans (North American market, 2012-2026) place 33 PSI front and rear on the door placard regardless of 15, 16 or 17-inch wheels; Brazil/Latin American placard figures could not be confirmed from an independent source and should be read directly off your own vehicle.

Why we are being careful with this number

A prior version of this guide stated a single universal PSI figure for every Versa trim and market. That is not how tire pressure specs work: automakers set the cold-inflation pressure based on the exact tire size, wheel diameter and vehicle loading for each trim, and figures can differ between the 15-inch, 16-inch and 17-inch wheel options offered across the years. This rewrite only states a number where it was found in a source, and flags anything unverified instead of guessing.

Brazil and Latin America market

The Versa sold in Brazil and across Latin America shares its platform and general chassis lineage with the North American Versa sedan, but Nissan does print market-specific placards, and we were not able to pull a confirmed Brazil-specific PSI figure from a credible source during this research pass. Rather than invent a number, we recommend using the figures below (from the closely related North American market) only as a reference point, and reading the exact figure off your own car.

Where to find your real number

  • The sticker on the driver-side door jamb (open the door and look at the pillar) - this is the manufacturer's authoritative figure for your exact trim and tire size
  • The Tire and Loading Information label, sometimes on the fuel filler door on some markets
  • Your owner's manual, in the section on wheels and tires
  • The sidewall of your tire, which lists the maximum pressure (not the recommended one) - do not use this number as your driving pressure

What verified sources show (North American Versa, same platform family)

Across multiple model years the cold tire pressure placard consistently reads 33 PSI front and rear for most trims and tire sizes, including 15-inch (185/65R15), 16-inch (195/55R16 or 205/55R16) and 17-inch (205/50R17) fitments. One earlier-year exception was found: the 2012 model year SL trim on 16-inch wheels (195/55R16) showed 35 PSI front and rear in the source consulted, while other 2012 trims on 15-inch wheels showed 33 PSI. Later years (2015 onward) show 33 PSI across all trims and wheel sizes checked.

Generation / yearsTrim or tire sizeFront (PSI)Rear (PSI)
2nd gen sedan, 2012 (first year)S, SL, SV - 185/65R153333
2nd gen sedan, 2012 (first year)SL - 195/55R163535
2nd gen sedan, 2015-2019S, S Plus, SV, SL - 185/65R15 or 195/55R163333
3rd gen sedan, 2020-2026S, S Plus, SV - 185/65R15 or 195/65R153333
3rd gen sedan, 2020-2026SR - 205/50R17; SV - 205/55R163333
Brazil / Latin America (all generations)Varies by trim - not corroborated for this rewriteCheck door placardCheck door placard

Winter and towing adjustments

In cold weather, tires can lose roughly 1 PSI for every 10 degrees Fahrenheit (about 5.5 degrees Celsius) drop in temperature. Some North American sources suggest inflating 3-5 PSI above the placard figure in winter to compensate, though this is a general guideline rather than a Nissan-specified figure - your owner's manual takes priority if it states otherwise.

Summary

2012 sedan, S/SL/SV on 15-inch tires33 PSI front/rear
2012 sedan, SL on 16-inch tires35 PSI front/rear
2015-2019 sedan, all trims33 PSI front/rear
2020-2026 sedan, S/S Plus/SV33 PSI front/rear
2020-2026 sedan, SR/SV (16-17 inch)33 PSI front/rear
Brazil / Latin America marketNot corroborated - check door placard
Where to verifyDriver door jamb placard

Full diagnostics

For the complete step-by-step diagnostic and repair guide, see Nissan Versa: Common Problems, Fault Codes & Repairs.

Frequently asked questions

Is there one tire pressure that fits every Nissan Versa trim?

Not necessarily. On the North American Versa, most trims and wheel sizes (15, 16 and 17-inch) do converge on 33 PSI front and rear across recent model years, but at least one earlier configuration (2012 SL on 16-inch wheels) used 35 PSI. Always check the tire size on your specific trim against your door placard rather than assuming a single figure applies.

What is the correct tire pressure for a Versa sold in Brazil?

We could not independently verify a Brazil-specific placard figure during this research, so we are not stating one as fact. The Brazil-market Versa shares its general platform with the North American version, where most trims show 33 PSI, but Nissan can and does print different figures for different markets. Check the sticker on your driver-side door jamb for the number that applies to your exact car.

Where exactly do I find the manufacturer's recommended tire pressure?

Open the driver's door and look at the door jamb (the pillar the door closes against) - the tire and loading information placard is printed there and lists the correct cold pressure for your specific trim and tire size. This is different from the maximum pressure printed on the tire's own sidewall, which is not the number you should drive on.

Does tire pressure differ between front and rear on the Versa?

In every model year and trim we could verify, the placard specified the same PSI for front and rear tires. This is common on front-wheel-drive sedans of this size and weight distribution, but you should still confirm both numbers on your own placard since it is the only figure specific to your exact vehicle.

Where the binding figure is on your car

The figures on this page are per-generation references compiled from manufacturer documentation and established fitment databases. Where your own vehicle disagrees with them, your vehicle is right.