Nissan Versa Bolt Pattern, Wheel & Tire Sizes
TL;DR
Brazil/LatAm Versa (both generations sold there, 2011-2019 and 2020-present) uses a 4x100mm bolt pattern; the current generation is confirmed at 60.1mm centre bore and M12x1.5 stud thread.
Which Versa this page covers
This page focuses on the Brazil / Latin-American market Nissan Versa sedan, which is a different vehicle line at different points in time than the Versa sold in North America. Two locally-relevant generations were researched: the first Versa sold in Brazil (roughly 2011-2019) and the current-generation Versa (2020-present, sold there as Sense, Advance and Exclusive trims).
What changed and what did not
Both Brazil/LatAm generations were corroborated as using a 4x100mm bolt pattern (4 studs, 100mm pitch circle diameter). Centre bore and stud thread were only independently corroborated for the current generation (60.1mm bore, M12x1.5 thread). For the earlier generation those two figures were not confirmed across multiple sources, so they are left blank below rather than guessed - read them off your own wheel or hub if you need them.
For context, the very first-generation Versa sold in North America (2007-2011, not sold under this name in Brazil) used a different pattern, 4x114.3mm, which shows why bolt pattern must always be checked per generation rather than assumed constant.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| Brazil/LatAm, 1st generation sold locally (approx. 2011-2019) | 4x100mm | Not independently confirmed - verify on your wheel | Not independently confirmed - verify on your wheel | 15 in, 16 in | 185/65 R15, 195/55 R16 |
| Brazil/LatAm, current generation (2020-present; Sense, Advance, Exclusive) | 4x100mm | 60.1mm | M12x1.5 | 15 in, 16 in, 17 in | 195/65 R15, 205/55 R16, 205/50 R17 |
| North America, 1st-gen Versa (2007-2011, not the Brazil model) | 4x114.3mm | Not confirmed in this research | Not confirmed in this research | Varies by trim | Not confirmed in this research |
Wheel offset
For the current Brazil/LatAm generation, sources point to an offset (ET) range of roughly 35 to 45mm depending on wheel size and trim. Offset varies more by wheel design than bolt pattern does, so treat this as a rough range, not a single fixed number.
Always confirm on your own vehicle
Bolt pattern, centre bore and tire size can vary by trim, wheel diameter and model-year running changes even within one generation. Before buying wheels, tires or spacers, confirm the figures directly from: the driver-door placard (often lists tire size and pressure), the tire sidewall markings on your current tires, your owner's manual, or by physically measuring your stock wheel and hub.
Summary
| Market focus | Brazil / Latin America |
|---|---|
| Current-gen bolt pattern (2020-present) | 4x100mm |
| Current-gen centre bore | 60.1mm |
| Current-gen stud thread | M12x1.5 |
| Current-gen wheel sizes | 15 in / 16 in / 17 in |
| Current-gen tire sizes | 195/65R15, 205/55R16, 205/50R17 |
| Earlier gen (2011-2019) bolt pattern | 4x100mm (centre bore/thread not confirmed) |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Nissan Versa: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the Nissan Versa bolt pattern the same in Brazil as in the United States?
For the generations sold in Brazil (roughly 2011-2019 and 2020-present), the confirmed bolt pattern is 4x100mm. The very first Versa generation sold in North America only (2007-2011) used a different pattern, 4x114.3mm, so figures from that earlier North American car should not be applied to a Brazil-market Versa.
What is the centre bore of the current Nissan Versa in Brazil?
For the current Brazil/Latin-American generation (2020-present), the centre bore is 60.1mm with an M12x1.5 stud thread. This figure was not independently confirmed for the earlier 2011-2019 generation, so check your own wheel or hub if you drive that older car.
What wheel and tire sizes come stock on the Nissan Versa in Brazil?
The current generation (2020-present) is offered with 15, 16 or 17-inch wheels, with tire sizes of 195/65 R15, 205/55 R16 or 205/50 R17 depending on trim. The earlier generation (2011-2019) used 15 or 16-inch wheels with 185/65 R15 or 195/55 R16 tires.
Where can I find the exact wheel spec for my specific Versa?
The most reliable source is your own vehicle: check the driver-door placard, the sidewall markings on your current tires, or your owner's manual. These reflect the exact trim and model year you own, which general reference tables cannot guarantee.