Renault Kwid Oil Capacity & Oil Type
TL;DR
Brazil-market Kwid 1.0 SCe (B4D engine, 2017-present): 3.0 L (3.2 US qt) with filter change. Viscosity varies by source - see notes below.
Renault Kwid oil capacity - Brazil/Latin America focus
The Kwid sold across Brazil and most of Latin America uses Renault's three-cylinder, 12-valve 1.0 SCe engine (factory code B4D), offered in gasoline and flex-fuel (gasoline/ethanol) form since the model's 2017 local launch. This is the figure most owners in the region need.
What we could verify
Multiple independent Brazilian oil-change kit listings (Elf, Castrol, Motrio-branded kits sold for the Kwid 1.0 12V) consistently package 3 liters of oil per service, and an independent engine-specifications database lists the same 3.0 L figure with a filter change for the B4D unit. That agreement across sources is why we can state 3.0 L with confidence for this engine.
Where sources disagree
Viscosity is less consistent. The engine-data source lists 5W-40 for the B4D unit, while the large majority of Brazilian retail oil-change kits we found are packaged with 10W-40 semi-synthetic oil (a grade widely used locally for flex-fuel engines running on ethanol blends). Both grades appear in the market - which one is correct for your car depends on model year and the spec sheet in your glovebox, so treat this as a range rather than a single verified number.
Engines we could not confidently verify
An earlier 0.8 SCe (B4A) three-cylinder engine was used in some export markets (notably India, from 2015) but was not the primary Brazil engine; one source lists the same 3.0 L figure for it, but we only found this in a single reference, so treat it as unconfirmed. A newer 1.0-liter DOHC/turbo variant sold in some markets has a capacity figure (around 2.56 L) reported by only one non-manufacturer source - we are not confident enough in that number to publish it as fact, so if your Kwid has this newer engine, check your own vehicle's documentation instead of assuming either figure.
Always confirm on your own vehicle
Engine oil specifications can change mid-generation and differ between gasoline and flex-fuel calibrations. Before any oil change, confirm the exact capacity and viscosity using:
- The oil cap or dipstick markings under the hood
- Your owner's manual or maintenance booklet (the official Renault source for your specific VIN and build date)
- The manufacturer's plate on the driver's door jamb, which sometimes references the maintenance document
- An authorized Renault dealer or service network, who can pull the exact spec for your chassis number
| Engine code / years | Capacity with filter (L / US qt) | Viscosity |
|---|---|---|
| B4D 1.0 SCe / SCe Flex, 12V, 3-cyl (Brazil/LatAm, 2017-present) | 3.0 L / 3.2 US qt | Sources vary: 10W-40 semi-synthetic (most Brazilian retail kits) or 5W-40 (engine-data reference) |
| B4A 0.8 SCe, 12V, 3-cyl (export markets, from 2015; single-source figure) | ~3.0 L / ~3.2 US qt (unconfirmed by a second source) | ~5W-40 (single source, unconfirmed) |
| Newer 1.0 DOHC/turbo variant (select markets) | Not independently confirmed - check your dipstick/manual | Not independently confirmed - check your owner's manual |
Summary
| Primary market covered | Brazil / Latin America |
|---|---|
| Main engine | 1.0 SCe, code B4D, 3-cylinder, 12-valve |
| Years | 2017-present (Brazil launch onward) |
| Capacity with filter | 3.0 L / 3.2 US qt |
| Viscosity | 10W-40 semi-synthetic (common) or 5W-40 (per engine-data reference) - sources vary |
| Other engines | 0.8 SCe (B4A, export markets) and newer DOHC/turbo variants exist - capacities not fully confirmed |
| Confirm on your car | Oil cap/dipstick, owner's manual, driver's door placard, or authorized dealer |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Renault Kwid: Common Problems, Fault Codes & Repairs.
Frequently asked questions
How much oil does a Brazilian-market Renault Kwid 1.0 take with a filter change?
For the 1.0 SCe (B4D) engine used since the 2017 Brazil launch, independent oil-kit listings and an engine-data reference agree on 3.0 liters (about 3.2 US quarts) including the filter change. Always double check against your own vehicle's dipstick and manual, since running changes can occur.
Is Renault Kwid oil 5W-40 or 10W-40?
Both appear in the market: one engine-specifications database lists 5W-40 for the B4D 1.0 SCe engine, while most Brazilian retail oil-change kits for the same engine are packaged with 10W-40 semi-synthetic oil, which is common locally for flex-fuel (ethanol-capable) engines. Check your oil filler cap, dipstick, or owner's manual to confirm which grade Renault specifies for your exact build.
Does the Renault Kwid oil capacity change between engine versions?
Yes. The Kwid has been built with more than one engine over time and across markets - the 1.0 SCe (B4D) is the main Brazil/Latin America unit, an earlier 0.8 SCe (B4A) was used in some export markets, and newer DOHC/turbo variants exist elsewhere. Capacity and viscosity can differ between these, so match the figure to your specific engine code, not just the model name.
Where can I find the exact oil capacity for my own Kwid?
The most reliable sources are the oil filler cap or dipstick under the hood, your owner's manual or maintenance booklet, and the manufacturer's data plate on the driver's door jamb - all specific to your car's VIN and build date. An authorized Renault dealer can also confirm the exact figure from your chassis number.