Toyota Camry Tire Pressure (Recommended PSI)
TL;DR
Camry cold tire pressure depends on generation and wheel size: 2012-2017 splits between 35 PSI (most trims) and 33 PSI (18-inch-wheel SE Sport and XSE), while 2018-2024 lists 35 PSI for every trim. The 2025-plus redesigned hybrid-only Camry's figure was not corroborated here - read it off your own placard.
Where the real number lives
Toyota tire pressure is set per generation, per trim, and per wheel size - it is stamped on the tire and loading information placard on the driver-side door jamb (open the door and look at the edge or pillar), and repeated in the owner's manual. That placard, not the tire sidewall, is the authoritative source: the sidewall only shows the tire's maximum pressure rating, not Toyota's recommended cold setting.
Why one figure is not enough
Independent placard-data listings show the Camry does not use one universal PSI across its life. For the 2012-2017 (XV50) generation, trims riding on 16 or 17-inch tires (L, LE, XLE, SE, and Hybrid variants) are placarded at 35 PSI front and rear, while the SE Sport and XSE trims on 18-inch tires (P225/45R18) drop to 33 PSI front and rear. For the 2018-2024 (XV70) generation, listings for both the 2018 and 2019 model years show 35 PSI front and rear across every trim, including the 19-inch-wheel XSE - so this generation appears to have standardized the figure rather than splitting it by wheel size, though a small number of owner reports mention 33 PSI on certain cars, which may reflect running lower-profile tires or a dealer adjustment rather than the factory spec.
The redesigned 2025-plus Camry
The current generation was fully redesigned as a hybrid-only model, and pressure listings for it were not populated in the sources checked for this page. Do not assume it carries over the 35 PSI figure from the prior generation - check your own placard.
How to read your placard
- Open the driver's door fully and look at the door jamb or the door edge itself for a white or silver sticker.
- The label lists tire size, front PSI, and rear PSI separately - front and rear are usually equal on the Camry, but always check both.
- Match the tire size on the label to the tire size actually mounted on your car, since a car may have been fitted with an optional or replacement wheel/tire package.
- If the placard is missing or unreadable, the owner's manual repeats the same figures under Tires and Wheels.
| Generation / years | Trim or tire size | Front (PSI) | Rear (PSI) |
|---|---|---|---|
| XV50 (2012-2017) | L, LE, XLE, SE, Hybrid (16 or 17 inch tires) | 35 | 35 |
| XV50 (2012-2017) | SE Sport, XSE (18 inch tires, P225/45R18) | 33 | 33 |
| XV70 (2018-2024) | All trims, including XSE (16 to 19 inch tires) | 35 | 35 |
| XV80 (2025-present, hybrid-only redesign) | All trims | Not verified - check door placard | Not verified - check door placard |
Summary
| Where to find the real figure | Driver-side door jamb placard, or owner's manual |
|---|---|
| XV50 (2012-2017), 16-17 inch wheel trims | 35 PSI front and rear |
| XV50 (2012-2017), 18 inch wheel trims (SE Sport, XSE) | 33 PSI front and rear |
| XV70 (2018-2024), all trims | 35 PSI front and rear |
| XV80 (2025-present) | Not corroborated - check your placard |
| Sidewall number | Maximum pressure, not the recommended setting |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Toyota Camry: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Why does one source say 33 PSI and another say 35 PSI for the same Camry?
Because the correct figure depends on generation, trim, and wheel size, not just the model name. On the 2012-2017 Camry, trims with 18-inch wheels (SE Sport, XSE) are placarded lower at 33 PSI, while smaller-wheel trims sit at 35 PSI. A source that quotes only one number is likely describing a single trim, not the whole model line.
Where exactly is the tire pressure placard on a Camry?
Open the driver's front door all the way and look at the door jamb (the vertical edge of the body the door closes against) or the lower door pillar. The sticker lists the original-equipment tire size along with the recommended cold front and rear PSI.
Can I use the PSI number printed on the tire sidewall instead?
No. The sidewall number is the tire's maximum cold inflation pressure (a safety ceiling set by the tire maker), not Toyota's recommended operating pressure. Always use the door placard or owner's manual figure instead.
Does the tire pressure change if I fit different-size wheels or tires?
Yes, potentially. The placard figure is calibrated to the original-equipment tire size for that trim. If you fit a different tire size, ask the installer or a Toyota dealer for the adjusted pressure, since a mismatched size can shift the correct PSI up or down.