Toyota Hilux Oil Capacity & Oil Type

Quick answer: This guide treats the Brazil / Latin American market Hilux as the primary subject. For the current generation (2016-2025) 2.8 Turbodiesel (engine code 1GD-FTV), oil capacity with a new filter is about 7.5 liters (7.9 US qt) of 5W-30 synthetic oil. The 2.7 flex/gasoline version (engine code 2TR-FE) takes about 5.6 liters (5.9 US qt).

TL;DR

Capacity depends heavily on which engine your Hilux has: roughly 5.6 L for the 2.7 flex-gas 2TR-FE, and roughly 7.5 L for the 2.8 turbodiesel 1GD-FTV, both figures with the filter changed.

Which Hilux this covers

This page focuses on the Brazil and Latin American market Toyota Hilux pickup, sold there mainly with two engines: the 2.7-liter flex (gasoline/ethanol) 2TR-FE, and the 2.8-liter turbodiesel 1GD-FTV used since the current generation launched around 2016. Older trucks (2005-2015 generation) commonly used the 3.0-liter turbodiesel 1KD-FTV, still very common on the road today.

Oil capacity and viscosity by engine

These figures come from published service data and Brazilian oil-change references; always confirm against your own vehicle before buying oil, since trim, filter type, and running changes can shift the number slightly.

Engine code / yearsCapacity with filter (L / US qt)Viscosity
2TR-FE 2.7L flex/gasoline (2005-2015, and continued on entry trims)5.6 L / 5.9 US qt5W-30 synthetic (API SN)
1GD-FTV 2.8L Turbodiesel (2016-2025, current generation, SR/SRV/SRX)7.5 L / 7.9 US qt (some spec sheets for non-DPF markets show 7.0-7.1 L - sources vary slightly)5W-30 synthetic (API SN/CF, ACEA C2/C3)
1KD-FTV 3.0L Turbodiesel (2005-2015 generation)6.9-7.5 L / 7.3-7.9 US qt (sources vary between these two figures)5W-30 or 10W-30 diesel-rated oil (API CF-4 or higher)

The 2.4L diesel (2GD-FTV)

Some other Latin American and global markets sell the Hilux with a smaller 2.4-liter turbodiesel (2GD-FTV) rather than the 2.8. Published figures for this engine's oil capacity conflict significantly between sources, so no number is stated here for it - check your filler cap and owner's manual if this is your engine.

Always confirm on your own vehicle

Oil capacity and the exact viscosity Toyota currently recommends can vary by production run and by market emissions requirements. The authoritative source for your specific Hilux is always your owner's manual, the oil filler cap (often stamped with the viscosity grade), and the driver's door placard. For towing-related fluid guidance, check the manufacturer's towing guide as well.

Summary

Primary market coveredBrazil / Latin America
2.7 flex (2TR-FE) capacity5.6 L / 5.9 US qt with filter
2.8 Turbodiesel (1GD-FTV) capacity~7.5 L / 7.9 US qt with filter
3.0 Turbodiesel (1KD-FTV, older gen)6.9-7.5 L / 7.3-7.9 US qt (sources vary)
Recommended viscosity (diesel)5W-30 synthetic (API SN/CF, ACEA C2/C3)
Recommended viscosity (2.7 flex)5W-30 synthetic (API SN)
Best source for your exact truckOwner's manual, filler cap, door placard

Full diagnostics

For the complete step-by-step diagnostic and repair guide, see Toyota Hilux: Common Problems, Fault Codes & Repairs.

Frequently asked questions

How much oil does a Brazilian-market Hilux 2.8 diesel take with a filter change?

Most published service data puts the 1GD-FTV 2.8 Turbodiesel (2016-2025 generation) at about 7.5 liters (7.9 US quarts) with a new filter, using 5W-30 synthetic oil. A few spec sheets for non-DPF markets list 7.0-7.1 liters instead, so confirm on your filler cap or owner's manual.

What oil does the 2.7 flex Hilux use?

The 2.7-liter flex/gasoline 2TR-FE engine takes about 5.6 liters (5.9 US quarts) with the filter changed, and Toyota specifies 5W-30 synthetic oil meeting API SN for this engine.

Is the oil capacity the same for older Hilux diesel trucks?

No. The earlier 2005-2015 generation commonly used the 3.0-liter 1KD-FTV diesel, and published figures for that engine range from about 6.9 to 7.5 liters depending on the source, so it should not be assumed equal to the newer 2.8-liter 1GD-FTV.

Where can I find the exact oil capacity for my specific Hilux?

Check your owner's manual (maintenance/specifications section), the oil filler cap on the engine (often stamped with the recommended viscosity), and the driver's door placard, since these reflect the exact figure for your engine, trim, and production year.

Where the binding figure is on your car

The figures on this page are per-generation references compiled from manufacturer documentation and established fitment databases. Where your own vehicle disagrees with them, your vehicle is right.