Toyota Hilux Bolt Pattern, Wheel & Tire Sizes
TL;DR
The Hilux sold in Brazil and Latin America has used 6 studs on a 139.7 mm circle with a 106.1 mm center bore since at least the 2005 generation through the current model; rim size and tire size grow from 15-16 inch on older base trims to 17-18 inch on SRV/SRX/GR-S trims.
Toyota Hilux wheel and tire specifications (Brazil / Latin America focus)
This guide covers the Toyota Hilux pickup as sold in Brazil and other Latin American markets, built on the Mercosur-region assembly lines. Figures below come from cross-checking multiple independent wheel-fitment databases (wheel-size.com generation and bolt-pattern listings) against Brazilian tire-retailer part listings for original-equipment sizes. Where sources agreed, we give a single figure; where we could not corroborate a number for a specific generation, we say so instead of guessing.
What stayed consistent
Every generation we checked - the 2005-2015 generation and the 2015-present generation, including the current facelift - showed the same 6x139.7 mm bolt pattern, 106.1 mm center bore, and M12 x 1.5 stud thread. This is a common Toyota pickup/SUV pattern shared with the Fortuner and 4Runner, so aftermarket wheels are widely available, but the figures below are still trim- and market-dependent for rim and tire size, and we did not find a Brazil-specific wheel-nut torque figure we could verify, so that column is intentionally left qualitative.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| 7th gen (2005-2015), AN10/AN20 - sold in Brazil as Hilux CS/CD | 6x139.7 | 106.1 mm | M12 x 1.5 | 15-16 inch (steel or alloy depending on trim) | 205/80R16, 215/80R16, 225/75R16 (4x4 SRV); base cab-chassis models used smaller 15 inch fitments |
| 8th gen (2016-2022), AN120/AN130 - Hilux SR, SRV, SRX | 6x139.7 | 106.1 mm | M12 x 1.5 | 17-18 inch alloy on SRV/SRX | 265/65R17 (SRV), 265/60R18 (SRX) |
| 8th gen facelift (2023-present), current Hilux incl. GR-S | 6x139.7 (unchanged in every listing we found) | 106.1 mm | M12 x 1.5 | 17-18 inch, 18 inch on GR-S / top trims | 265/65R17 or 265/60R18 depending on trim; GR-S trim sizes vary by market release, check your placard |
Where to double-check for your exact vehicle
Bolt pattern is stable across these generations, but tire size, load rating, and offset change by trim, cab style (single/extra/double cab) and factory rim diameter. Always confirm against:
- The driver's door placard (inside the door jamb) for the exact factory tire size and cold pressure
- The owner's manual for wheel and tire specifications and any towing-related adjustments
- The markings stamped directly on your current wheel and tire sidewall
- An authorized Toyota dealer parts catalogue if you are ordering replacement wheels
Notes on accuracy
We deliberately did not include a universal lug-nut torque figure: torque specs we found were tied to a non-Brazil market listing, so publishing them here risked misleading a Brazilian owner. If your source (owner's manual or dealer) gives a figure, use that instead.
Summary
| Bolt pattern | 6x139.7 mm (all generations checked) |
|---|---|
| Centre bore | 106.1 mm |
| Stud thread | M12 x 1.5 |
| Wheel nut torque | Not verified for Brazil market - check owner's manual |
| Stock rim sizes | 15-18 inch depending on generation and trim |
| Common tire sizes | 205/80R16 to 265/60R18 depending on trim |
| Primary market covered | Brazil / Latin America (Mercosur-built Hilux) |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Toyota Hilux: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Does the Hilux bolt pattern change between generations?
Across every generation we could verify (2005-2015 and 2015-present, including the current facelift), independent wheel-fitment databases show the same 6x139.7 mm pattern with a 106.1 mm center bore. We did not find evidence of a pattern change for the Brazil/Latin-America Hilux, but always verify against your own vehicle's placard before buying wheels.
What tire size came standard on my Hilux?
It depends heavily on trim and cab style. Base and mid trims (SR/SRV) commonly used 205/80R16 to 265/65R17 depending on year, while higher trims (SRX and GR-S) commonly used 265/60R18. The definitive figure for your exact vehicle is printed on the driver's door placard.
Will Fortuner or Hilux SW4 wheels fit my Hilux?
The Hilux pickup and the Fortuner/SW4 SUV built on the same platform generally share the 6x139.7 bolt pattern and 106.1 mm center bore, which is why aftermarket listings frequently cross-list them. Still confirm offset and load rating for your specific trim before swapping wheels.
Where is the most reliable source for my exact Hilux wheel specs?
The driver's door placard (door jamb sticker) is the manufacturer's own record for your exact build, including tire size and pressure. The owner's manual repeats this and adds torque and towing notes. Databases like this page are a useful starting point but a factory placard always overrides a general guide.