Volkswagen Tiguan Bolt Pattern, Wheel & Tire Sizes
TL;DR
Mk1 and Mk2 Tiguans share 5x112 / 57.1 mm / M14x1.5. The new Mk3 is too recent for verified aftermarket fitment data, so confirm it on your own car.
Bolt pattern by generation
Wheel-fitment databases that track individual model years consistently report 5x112 mm (5 lugs, 112 mm bolt circle) for both the first-generation Tiguan (5N, 2007-2018) and the second-generation Tiguan (AD/BW, 2016-2024, sold in North America as 2018-2024). Center bore is listed as 57.1 mm and stud thread as M14x1.5 for both generations. A commonly cited lug torque figure of 100 ft-lbs (135 Nm) appears in aftermarket fitment guides for these generations, but it comes from a single class of source (not the VW factory manual), so treat it as a starting reference and confirm with your own manual or dealer.
Third generation (Mk3 / CT1, 2024 Europe, 2025 North America)
The Mk3 Tiguan is new enough that independent wheel-fitment databases have not yet published corroborated bolt-pattern figures for it at the time of writing. Rather than guess, we recommend reading the pattern directly off your vehicle documentation or a wheel already mounted on the car (see below).
Stock wheel and tire sizes
Across Mk1 and Mk2 model years, factory-fitment guides list OE wheel diameters spanning roughly 16 to 20 inches depending on trim and market, with tire sizes commonly including 215/65R16, 235/55R17, 235/50R18, and 235/50R19 on higher trims (R-Line and similar sport trims have been fitted with 20-inch wheels in some markets). Exact wheel width, offset, and tire size depend heavily on trim level and country, so use the table below as a starting point only and confirm against your own door placard or tire sidewall.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| Mk1 / 5N (2007-2018; NA 2009-2017/18 as Tiguan Limited) | 5x112 | 57.1 mm | M14x1.5 | ~16-18 in (trim dependent) | 215/65R16, 235/55R17, 235/50R18 |
| Mk2 / AD-BW (2016-2024; NA 2018-2024) | 5x112 | 57.1 mm | M14x1.5 | ~17-20 in (trim dependent) | 235/55R18, 235/50R19, tires as small as 255/40R20 on some sport trims |
| Mk3 / CT1 (2024 Europe, 2025 NA-present) | Not yet independently corroborated - check your vehicle | Not yet independently corroborated | Not yet independently corroborated | Varies by trim; read off your own wheel or documentation | Varies by trim; read off your tire sidewall |
Always verify on your own vehicle
Bolt pattern, center bore, and recommended tire sizes can vary by trim, wheel option, and production date even within one generation. Before buying wheels or tires, confirm the exact specification for your specific car using:
- The driver-side door placard (inside the door jamb), which lists tire size and often cold inflation pressure.
- The owner's manual, which lists approved wheel and tire combinations and torque specs.
- The markings stamped directly onto your current wheels and tire sidewalls.
- Volkswagen's official parts/wheel catalogue or a dealer parts department for your exact VIN.
FAQ
Summary
| Mk1 (2007-2018) bolt pattern | 5x112 mm |
|---|---|
| Mk2 (2016-2024) bolt pattern | 5x112 mm |
| Mk1/Mk2 centre bore | 57.1 mm |
| Mk1/Mk2 stud thread | M14x1.5 |
| Mk3 (2024/2025-present) bolt pattern | Not yet independently corroborated - verify on your vehicle |
| Typical OE wheel diameter | 16-20 in (trim dependent) |
| Common OE tire sizes | 215/65R16 to 235/50R19 |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Volkswagen Tiguan: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Is the bolt pattern the same on every Volkswagen Tiguan generation?
The first-generation (Mk1, 2007-2018) and second-generation (Mk2, 2016-2024) Tiguan both use 5x112 mm according to fitment databases that track model years individually. The brand-new third generation (Mk3, 2024/2025-present) has not yet had its bolt pattern independently corroborated across multiple sources at the time of writing, so do not assume it is identical - check your own vehicle.
What center bore and stud thread does the Volkswagen Tiguan use?
For the Mk1 and Mk2 generations, fitment databases list a 57.1 mm center bore and M14x1.5 wheel stud thread. These figures are not yet confirmed for the Mk3. If you are buying aftermarket wheels, use hub-centric rings if the wheel's bore is larger than your hub, and always use lug nuts or bolts matched to the correct thread and seat type (VW commonly uses ball-seat, not conical-seat, hardware).
What size wheels and tires come stock on the Tiguan?
Factory fitment varies by trim and market, but commonly ranges from 16-inch wheels on base Mk1 trims up to 19 or 20-inch wheels on higher Mk2 sport trims, with tire sizes such as 215/65R16, 235/55R17/18, and 235/50R19 appearing across the lineup. Your exact factory size is printed on the door placard and on the tire sidewall itself.
Where is the most reliable place to confirm my own Tiguan's wheel specs?
The driver's door jamb placard and the owner's manual are the manufacturer-sourced references for your specific VIN and options. The numbers stamped on your current wheels (bolt count and diameter) and the size printed on your tire sidewall are also direct, vehicle-specific confirmations that outrank any general online database.