Toyota Tacoma Oil Capacity & Oil Type
TL;DR
Tacoma oil capacity ranges from about 4.8 to 6.2 US quarts depending on engine and generation; confirm the exact number and viscosity on your oil filler cap or in your owner's manual before topping off.
Why there is no single number for every Tacoma
The Tacoma has been built with at least five distinct engines since 1995 (2RZ-FE, 3RZ-FE, 5VZ-FE, 2TR-FE, 1GR-FE, 2GR-FKS, and T24A-FTS), and even within one engine family the oil pan and filter changed across the production run. Quoting one capacity for the whole nameplate is how inaccurate figures end up online, so this page only lists numbers confirmed for a specific engine code and year range.
Confirmed capacities by engine
The table below lists only the figures that could be corroborated against dealer service data, oil-lookup tools, and Toyota maintenance documentation for that specific engine code.
| Engine code / years | Capacity with filter (L / US qt) | Viscosity |
|---|---|---|
| 2.7L I4 2TR-FE (2005-2015) | 5.2 L / 5.5 qt | SAE 0W-20 |
| 4.0L V6 1GR-FE (2005-2007) | 4.5 L / 4.8 qt | SAE 5W-30 |
| 4.0L V6 1GR-FE (2008-2015) | 5.2 L / 5.5 qt | SAE 5W-30 |
| 2.7L I4 2TR-FE (2016-2023) | 5.8-5.9 L / 6.1-6.2 qt | SAE 0W-20 |
| 3.5L V6 2GR-FKS (2016-2023) | 5.8-5.9 L / 6.1-6.2 qt | SAE 0W-20 |
| 2.4L Turbo I4 T24A-FTS (2024+, incl. i-FORCE MAX hybrid) | 5.6 L / 5.9 qt | SAE 0W-20 |
Sources vary slightly between 6.1 and 6.2 US quarts for the 2016-2023 four-cylinder and V6 engines - the difference is a rounding artifact between liter and quart conversions used by different tools, not a real spec change.
1995-2004 first-generation engines
The original 2.4L 2RZ-FE, 2.7L 3RZ-FE, and 3.4L 5VZ-FE engines could not be corroborated with a confident capacity and viscosity pairing from current sources. If you own one of these trucks, read the capacity directly off your oil filler cap or dipstick markings, or consult a Toyota dealer parts department with your VIN.
Where to find the number for your exact truck
- The oil filler cap on top of the engine is often stamped with the correct viscosity grade.
- The driver's door jamb placard lists tire and sometimes fluid specifications for your specific build.
- Your owner's manual (glovebox copy or Toyota's online manual portal by VIN) has the definitive capacity and viscosity table for your engine code.
- A dealer parts or service department can look up the exact factory figure using your 17-digit VIN.
Practical tips for a correct oil change
Always add oil in stages and check the dipstick rather than pouring the full listed capacity at once, since a new filter or a partially drained pan changes how much the engine actually needs. Running the engine briefly and rechecking the level after a few minutes gives the most accurate reading.
Summary
| 2.7L I4 2TR-FE (2005-2015) | 5.2 L / 5.5 qt, 0W-20 |
|---|---|
| 4.0L V6 1GR-FE (2005-2007) | 4.5 L / 4.8 qt, 5W-30 |
| 4.0L V6 1GR-FE (2008-2015) | 5.2 L / 5.5 qt, 5W-30 |
| 2.7L I4 2TR-FE (2016-2023) | 5.8-5.9 L / 6.1-6.2 qt, 0W-20 |
| 3.5L V6 2GR-FKS (2016-2023) | 5.8-5.9 L / 6.1-6.2 qt, 0W-20 |
| 2.4L Turbo T24A-FTS (2024+) | 5.6 L / 5.9 qt, 0W-20 |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Toyota Tacoma: Common Problems, Fault Codes & Repairs.
Frequently asked questions
How much oil does a Toyota Tacoma V6 take?
It depends which V6. The 2005-2007 4.0L 1GR-FE takes about 4.8 US qt (4.5 L), the 2008-2015 1GR-FE takes about 5.5 US qt (5.2 L), and both use 5W-30. The 2016-2023 3.5L 2GR-FKS takes about 6.1-6.2 US qt (5.8-5.9 L) of 0W-20. Confirm your engine code before buying oil.
What oil viscosity does a Tacoma need?
The 2.7L 2TR-FE (2005-2023) and the 3.5L 2GR-FKS and 2.4L turbo T24A-FTS all call for SAE 0W-20. The 4.0L 1GR-FE V6 (2005-2015) calls for SAE 5W-30 instead. Check your oil filler cap or owner's manual to confirm which engine you have.
Does the 2024+ Tacoma i-FORCE MAX hybrid need a different oil capacity than the standard turbo?
No - the hybrid i-FORCE MAX pairs an electric motor with the same 2.4L T24A-FTS turbo engine, and the engine oil capacity and viscosity (about 5.9 US qt / 5.6 L of 0W-20) are the same as the non-hybrid turbo Tacoma. The hybrid battery and motor do not use engine oil.
Why do different websites list different oil capacities for the same Tacoma year?
Small variations (for example 6.1 vs 6.2 quarts) usually come from rounding a liter figure to quarts differently, or from a source quoting the capacity without the filter change included. Bigger discrepancies often mean the source mixed up two different engine generations that share a similar name - always match the number to your specific engine code, not just the model year.