Toyota Tacoma Bolt Pattern, Wheel & Tire Sizes
TL;DR
The Tacoma is not one universal bolt pattern across its history - always confirm the pattern, centre bore, and lug thread for your exact year, drivetrain, and trim before buying wheels.
Why this varies so much
The Tacoma's wheel fitment changed more than once. Early trucks split by drivetrain (2WD versus 4WD/PreRunner), and the 2024 redesign changed the centre bore and lug thread even though the bolt pattern stayed the same number. Mixing up these details is the most common reason aftermarket wheels do not sit flush or vibrate at speed.
What is confirmed by generation
The table below only lists figures that were corroborated by wheel-fitment references and Tacoma-specific forum and shop sources. Where sources disagreed (2nd generation 2WD lug count), it is flagged rather than stated as fact.
| Generation / years | Bolt pattern | Centre bore | Stud thread | Stock wheel sizes | Common tire sizes |
|---|---|---|---|---|---|
| 1st gen (N100), 1995-2004 - 2WD | 5x114.3mm | 60.1mm | M12x1.5 | 15-16 in steel/alloy | Varies by trim - check door placard |
| 1st gen (N100), 1995-2004 - 4WD / PreRunner | 6x139.7mm | 67.1mm | M12x1.5 | 15-16 in steel/alloy | Varies by trim - check door placard |
| 2nd gen (N200), 2005-2015 | 6x139.7mm on most 4WD/PreRunner trucks; some 2WD 4-cyl trims reported as 5x114.3mm - sources vary, verify on your truck | ~106.1mm (6-lug trucks) | M12x1.5 | 15-18 in depending on trim | 215/70R15, 245/75R16, 265/70R16, 265/65R17 (varies by engine/trim) |
| 3rd gen (N300), 2016-2023 | 6x139.7mm | 106.1mm | M12x1.5 | 16-18 in depending on trim | 245/75R16, 265/70R16, 265/65R17, 265/60R18 |
| 4th gen (N400), 2024-present | 6x139.7mm | 95.1mm | M14x1.5 | 17-18 in depending on trim | 245/70R17, 265/70R17, 265/65R18, 265/70R18 |
Centre bore matters even when the pattern matches
Because the 4th generation kept the same 6x139.7mm bolt pattern as the 3rd generation but shrank the centre bore from 106.1mm to 95.1mm, older wheels can bolt on but will not be hub-centric on the newer truck. Hub-centric rings are the usual fix when reusing wheels across these two generations.
Always confirm on your own vehicle
Bolt patterns, centre bore, and lug thread can differ by trim, drivetrain, and market even within one model year. Before buying wheels, confirm your exact specification using:
- The tire and loading placard on the driver's door jamb
- Your owner's manual
- The markings stamped on your current wheels and tires
- Toyota's official wheel fitment or towing guide for your specific trim
Summary
| 1st/2nd gen 2WD bolt pattern | 5x114.3mm (many trims) |
|---|---|
| 1st/2nd gen 4WD/PreRunner bolt pattern | 6x139.7mm |
| 3rd gen (2016-2023) bolt pattern | 6x139.7mm |
| 3rd gen centre bore | 106.1mm |
| 4th gen (2024+) bolt pattern | 6x139.7mm |
| 4th gen centre bore | 95.1mm |
| 4th gen lug thread | M14x1.5 |
Full diagnostics
For the complete step-by-step diagnostic and repair guide, see Toyota Tacoma: Common Problems, Fault Codes & Repairs.
Frequently asked questions
Do all Toyota Tacoma generations use the same bolt pattern?
No. Early 2WD Tacomas (1995-2015) commonly used a 5x114.3mm pattern while 4WD and PreRunner trucks of the same era used 6x139.7mm. Every Tacoma from the 3rd generation (2016) onward uses 6x139.7mm, so pattern alone does not guarantee wheels swap across all years - the centre bore also changed in 2024.
Will 2023 Tacoma wheels fit a 2024 Tacoma?
The bolt pattern is the same 6x139.7mm on both, but the 2024-and-newer (4th generation) truck has a smaller 95.1mm centre bore versus 106.1mm on 2016-2023 trucks, so older wheels will not be hub-centric on the new truck. Hub-centric rings are commonly used to correct this when reusing older wheels.
What lug nut thread does my Tacoma use?
1995-2023 Tacomas generally use M12x1.5 lug nuts, while 2024-and-newer (4th generation) trucks switched to M14x1.5. Confirm on your own truck by checking the lug nuts currently installed or your owner's manual, since a wrong thread will not seat safely.
Where can I find the exact wheel specs for my specific Tacoma?
Check the tire and loading placard inside the driver's door jamb, your owner's manual, the size markings on your current wheels and tires, or Toyota's official fitment documentation for your model year and trim. These are the authoritative sources for your individual vehicle.